How to use OBDII ELM327 Bluetooth Diagnostic Your Car
by Magic Lee obd2repairAfter installing Bluetooth ELM327 scanner OBD2 Scanner on your Windows operation system, Bluetooth ELM327 will then successfully work with OBD-II scanmaster Diagnostic software
Bluetooth ELM327 Can Bus interface ELM 327 Bluetooth OBDII Scan
To use OBDII ELM327 Bluetooth diagnostic your car, first you need know how to install bluetooth ELM327 OBD2 Software
Here OBD2Repair share with you the steps of install Bluetooth ELM327 OBD2 Software on Window OS.
STEP 1: Locate Your Cars Diagnostics Connector.
The Bluetooth ELM327 16-pin diagnostic link connector (DLC) should be
located in the passanger or driver's compartment, under the steering
wheel. Can't find it? pls ask for the supplier of cars
STEP 2: Turn ON Car Ignition and Then Plug in ELM327 Bluetooth OBDII Scan Tool into Cars Port
STEP 3: Add ELM327 Bluetooth Scan Tool, Double-click the icon in the system tray.
The "Bluetooth Devices" window will appear:
Click "Add". \
STEP 4: This part only applies to Windows XP.
The "Add Bluetooth Device Wizard will appear:
Check the "My Device is set up and ready to be found" check box, then click the "Next" button.
The Wizard will search for and display Bluetooth devices within range:
STEP 5: Click on "CAN OBDII" (may also show up as "CBT"). Then click "Next".
Windows XP:
Select "Use the passkey found in the documentation".
Windows Vista/7/8:
Select "Enter the device's pairing code"
Enter: 6789 or 1234, 0000
Then click "Next".
If "6789" doesn't work, then try "1234" or "0000".
STEP 6:
The Wizard will connect to the scan tool: bluetooth elm327 setup elm bluetooth scan tool
STEP 7:
Once it's setup, the wizard will display the COM port numbers:
bluetooth elm327 OBD-ii adapter, Write down the number of the Outgoing
COM port. You will need it later to configure the diagnostics software.
STEP 8:
Now you can successfully use any Bluetooth ELM327 OBD2 diagnostics
software! And it should read your cars data by Bluetooth ELM327 OBDII
Scan tool.
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.