Articles

How to use iCopy 3 RFID NFC Duplicator?

by Nancy N. DIY diagnostic and car repair tools

Newest iCopy 3 Smart Card Key Machine RFID NFC Copier IC/ID Reader/Writer Duplicator - Designed specifically for Locksmiths! Maybe you will ask How to use iCopy 3 RFID NFC Duplicator? or how to use English version iCopy 3 Full decode Function? in this article, you can find the answers

Instruction for use

Copy a keycard:

press "card" and enter the "smart cards page". then key card in the induction area, press "read", the reader successfully, replace the blank card to the induction area, press " write", Copied successfully

Use iCmp decoding software copy IC card

The device is turned into the "disclaimer page", The micro usb cable to connect the device with the PC, PC appears U disk, Open U disk inside the icopy decoding software, press " ok" to enter the main interface of the device, The IC Card on the induction Area, Click on the start decoding software, after decoding is successful, the replacement of a blank card to induction area, according to the " write" success writing cards, copied successfully.

Charge For The ICopy( Only with lithium battery products)

The Micro usb data cable to connect the device, and the other end connected to any USB port 5V interface,(Mobile phone charger or PC's USB port). until the charging device lights green, charging is completed.

Note: The lithium battery can't be replaced by users, such as battery damage need to change, please contact the professionals.

A more detailed description, please click on the help icopy decoding software


Sponsor Ads


About Nancy N. Senior   DIY diagnostic and car repair tools

198 connections, 4 recommendations, 710 honor points.
Joined APSense since, July 21st, 2012, From shenzhen, China.

Created on May 1st 2018 09:27. Viewed 205 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.