How to Save Lonsdor K518ISE power to prolong stand-by time

by Alex Carter Mechanic Assistant

Here’s the tutorial on adding Hibernation function on Lonsdor K518ISE tablet key programmer .

Updated Device: Lonsdor K518ISE

Updated Condition: for all K518 devices with working normally

Updated Content: Added Hibernation function; Kernel update supported

Update Benefit: Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in hot summer.

Updated Version: K518 APK V1.5.25

Preparation for Update:

Power on the device or keep the battery level over 80%.
Make sure wifi network is in good condition and the device receives signal normally;

Update steps:

Click [One key update] and skip to below K518ISE interface. Then click the first button to update system. When the update complete, click [OK] to reboot the device.

After rebooting, click and enter [Settings] menu, you will find there are two additional function buttons: [Update Kernel ] and [Display Settings].

Click [Update Kernel] first and skip to below interface, then press [Update] to update the kernel.

Click [Install] after updating the kernel file. And the device will reboot to install kernel.

Blank screen is normal during the installation. The whole process will take 5 minutes, be patient to wait and don’t restart the device manually.

The update complete when the password input interface appears. Screen auto-lock in the [Display Settings ] is added.

Enter [Settings]→[Display Settings] to adjust the screen brightness and screen auto-locking time .

Save power to prolong stand-by time. Auto standby function can prevent the Lonsdor K518 from being overheated in hot summer.

Lonsdor-K518ISE-update-Hibernation-Function-obdii365.doc

45 connections, 0 recommendations, 438 honor points.
Joined APSense since, July 23rd, 2015, From Carlifornia, United States.

Created on Apr 13th 2018 00:56. Viewed 222 times.

No comment, be the first to comment.

Please sign in before you comment.