How to Fix HP Printers Cartridge Leaking?

by Hp Printer Hp Printer support NZ -

The Printer cartridge contains a particular concoction of powder, ink, and lubricants to print vivid images and letters. Most of them are airtight wet inks, with a single small hole for allocating the ink mixture when printing commands are received by printers. But occasionally faults occur when cartridges leak its particular area and spread the concoction of ink within the machine and on a paper.

When this error occurs, you became worried and think about it fixes or a replacement, but you couldn’t find an expected solution to get rid of this issue. 'Not anymore!' Today, HP Printer Support NZ is presenting you a flawless solution to fix this fault for good.

Step 1: - Turn off the printer, open its back panel and unlock the printer holders and aligners. Lift up the ink canister carefully, when the holding tab will begin to lose it, and then pull it out and up.

Step 2: - Take a fabric wet/ alcohol swab to clean the canister, wipe the contacts and flat surfaces. (Do not use a water-based solution; it may damage the electrical terminal/ contacts.).

Step 3: - Sometimes dust or wreckage of ink can cause leakage, so clean the printer head and roller where it touches the ink cartridge.

Step 4: - Rub it with white cloth or tissue to identify the leaking area. If it only shows color at the outlet; your cartridge is fine.

Step 5: - Make sure that you are inspecting the exact leaking location, if in doubt; squeeze the cartridge until you see the bleed area.

Step 6: - Using a dry swab/ cloth; wipe the cartridge’s leaked location, take an enough piece of adhesive tape and place all over the affected area (do it smooth as much as possible).

Step 7: - Replace the ink canister in the machine and test to a print to ensure that the bleed area is firmly protected against leakage.

Now, your HP printer is ready to work without leakage. However, if you feel your issue is still unresolved or you have other queries; contact HP Printer Technical Support Number 04-8879109. Our experts will be happy to help you.

Original Source