How to Fix HP BIOS Application Selected Is Corrupt or Missing Problem?

The system performs a checksum test of the BIOS at the time of startup process. If the checksum is incorrect or improper then the BIOS is assumed to be corrupted. The error comes up with the “HP BIOS application selected is corrupted or missing. Please install the application and try again. BIOS application error (501) ENTER – Continue”. Here the system will install a hidden copy of the BIOS in order to correct the problem, and the startup process continues. For more information, consult experts at HP Help Number.

Moreover, before your computer reboots automatically, the following message will appear on your screen for approx. 15 seconds before, here, you will have the option to press “Enter” in order to proceed-

The CMOS checksum is invalid. 

The CMOS will be reset to the default configuration and will be rebooted. 

Please check your BIOS Setup options to see if they changed. 

CMOS Reset (502) 

ENTER - Reboot the system

Once the computer starts, there will another message appeared on your screen in order to indicate that the BIOS has been reset. Nevertheless, if the same error appears more than once, then there can be an issue with the installed version of the BIOS, and you should install updated BIOS.

To resolve the issues, it is must install an updated BIOS; simply install the latest BIOS for your computer with the following steps-

• First of all, you need to turn off your computer.

• Now, press and hold the Windows logo key and the B key 

• Next, you need to press and hold down the Power Button on the computer for few seconds. After this, you are required to release the Power button but continue to hold the Windows and B keys until the BIOS update screen is displayed or until you hear a beeping sound 

• Once the BIOS is recovered, Continue Startup Button will display and a timer counts down. After this, you have to click the Continue Startup button in order to restart the computer immediately. The computer will restart automatically when the timer reaches zero.

• Once the computer restarts, there will a black screen appears with a message similar When the computer restarts, a black screen appears with a message similar to the following:

• A system BIOS Recovery has occurred. 

BIOS Recovery (500) 

Enter - Continue Startup

• Further, you are required to press the “Enter” key in order to continue immediately or enable the computer to reboot automatically.

• At last, once you restart Windows might display a message indicating that the computer was incorrectly shut down. 

For more information and help, feel free to contact our technical support service through our HP Helpline Number +1-877-645-7494. The number is offered as a communication mode, therefore, you can get an instant help from the experts and adept professionals.

View Source: https://wp.me/p9tIK6-28

Report this Page