How to fix HDCP error on PC and Roku Player?

by Anna Mathew Digital marketer

The most infamous of all the errors occurring nowadays on smart devices is the HDCP error. HDCP stands for High-bandwidth Digital Content Protection, it is a program developed by Intel for protecting the content distributors and creators. It is also better known as HDMI cable though it is the one that connects the device and TV. The notification “HDCP Error Detected ” often appears on the screen, when showing the error. The primary cause behind these errors is attachment issues between the machine and TV or hardware issues between devices and TV. The HDCP issue occurs in several devices, but in this workaround, we are mainly focusing on Roku and PC.

Causes for HDCP

Before HDCP developed, the malware through internet surfing was conducted as the main culprit behind the errors. In the case of HDCP, it is different; the causes for error have changed a bit. As the HDCP is used with HDMI and more other digital video standards such as Digital Visual Interface, the error causing elements are mainly hidden in wires and cables. So you need to check all the cables that are plugged-in or connected with HDCP. You can detect the flaw by scanning your PC via Reimage. The compatibility issue can also be the reason as many devices such as TV, AVR and Roku player, make sure you check their compatibility. If it is the compatibility issue, then you can fix this from the settings. Although we have prepared a proper workaround to fix HDCP errors in devices.

Fixing the HDCP error on Roku Player

Roku player is a popular device used to stream multiple streaming services. Roku often faces HDCP errors as there are several wires and cables used in the Roku player. To fix the HDCP error in Roku, all you need to do is restart your device by unplugging all the cables and wires in the Roku, and after that, plug them again. The steps to execute this process are below:

You need to disconnect the HDMI cable from the TV.

Disconnect the cable from the Roku player too.

You need to Turn off the devices by toggling the switch or removing the cord from the extension board.

Now, you need to reboot your Roku player and plug-in all the cables and cords back to their inputs.

Make sure all the cables and wire are attached correctly.

Now, toggle the switch to turn on the Roku player.

After, the Roku player has successfully restarted, check whether the issue causing error persists or not.

If any of your cables has a default, then switch them.

Fixing the HDCP Error on PC

PCs often face HDCP errors as explained above that the main causes for the HDCP errors are HDMI cables and Wires. This unwanted phenomenon lies in the PC case, too, and to fix this error; we need two monitors. We will fix the PC HDCP error by checking the HDMI cable plugged in Monitor of the PC and try plugging it in another monitor. We will also check that both the devices that we are using are compatible with HDCP support. The steps to execute this method are below:

First, you need to use a different HDMI cable on your PC monitor and check if the issue is not involved in your PC. Make sure that the Cable is either new or in proper working conditions.

Now, plug-in the Cable into the secondary monitor.

If there is no issue in the monitor and the Cable, then try switching to a TV that supports the HDCP.

If you have tried all these fixes and the issue persists, then contact any official from the company of your devices.

Anna Mathew, writer of this blog loves to write and create awareness related to day-to-day internet threats. Major topics of her interest are printer support like epson printer support, canon printer support, dell printer support, etc.