How to Code and Program BMW F-series with CGDI

CGDI Prog BMW is not only able to program keys, read ISN code, but also do ECU coding and programming. Here’s the factory guide to code/program F-series module, i.e FEM Body as an example.

Connect CGDI MB with vehicle via OBD socket through main test cable

Open CGDI BMW software, select “BMW F series coding”

This function needs connecting to network, please ensure that the network is stable,
click “read ecu info”

After read ecu info successfully, click 3.FEM_BODY

Select Backup coding

Confirm

Backup coding succeed. This is the save route.

Select Coding

Coding is successful.

Select “BMW F Series Program”

Data was read successfully, display relevant module information

To program FEM-BODY as example, click “program”

Please ensure that the battery has enough power and click ‘yes’

1. Make sure the VIN is correct.
2. Support modification

Programming, please be patient

Verify FLASH correctly and program successfully.

Report this Page