How to Adjust Seat for Bobcat S150 Excavator

by Dave Jack Auto Car Repair Knowledge

Use the bucket or attachment steps, grab handles and safety treads (on the loader lift arms and frame) to get on and off the loader . Do not jump.
2018 Bobcat Advanced Troublshooting System Download

Safety treads are installed on the Bobcat Loader to provide a slip resistant surface for getting on and off the loader.Keep safety treads clean and replace when damaged.
Replacement treads are available from your Bobcat dealer.
Read and understand the Operation & Maintenance Manual and the Operator’s Handbook (1) before operating the loader.
The Operation & Maintenance Manual and other manuals can be kept in a container (2) provided behind the operator seat.

Release the seat lever (1) and adjust the seat position for comfortable operation of the loader controls.

Suspension Seat - (Option) Release the lever (1) to adjust the seat distance from the levers and footrests.
Release the lever (2) [Figure 12] to adjust the angle of the seat back.
Turn the lever (3) [Figure 12] to adjust the seat cushion for weight of the operator.

Seat Belt Adjustment
Squeeze both seat belt adjusters to release and lengthen each half of the seat belt.
Fasten the seat belt.
Pull the ends of the belt through the belt adjusters so that the seat belt is snug and the buckle is centered between your hips.

3-Point Restraint - (Option) Connect the shoulder belt to the lap belt (1) [Figure 14]. Pull the lap belt across to the left side of the seat (2) [Figure 14] and fasten.
The shoulder belt must be positioned over your right shoulder and lap belt over your lower hips.

Lower the seat bar and engage the parking brake (1).
Put the foot pedals or hand controls in neutral position.
NOTE: Keep your hands on the steering levers and your feet on the foot pedals (or footrests) while operating the loader.