Get the Knowledge About Different Types of Jib Cranes

by Avadhesh Sharma SEO Analyst

Jib cranes are nowadays an asset for enhancing the production rate with fewer injuries and improved safety phenomenon. It has already shown its practical success all over the world.

If employers feel for worker’s struggles and their injury-prone situations, jib cranes are the best option. It will not only save the money from donating towards the injured workers and their families but also enhance productivity.

It is known as an overhead device that is used for unique and repetitive lifting jobs. It is quite versatile to pair with other cranes for maximising the production goals.

Jib cranes come with flawless design with variable capacities ranging from 0.25 to 15 tons. We hardly can see any other appealing ergonomic design like this where we will find everything in one place.

Here, you will know about different cranes with their components & configurations details. The main goal will be to make you aware of the system and its functionality.

Components and Designs of Jib Cranes:

In every case, you would observe its basic construction and design. Compared with other cranes like gantry or bridge cranes, it required low maintenance and yet was very simple for operation.You rarely notice any breakdown of its parts.

There are some terms and components, you will know for the first time about jib cranes.

• Boom/Reach: It refers to the beam place horizontally across the trolley.

• Pillar/Mast: It is the vertical beam used for mast systems and freestanding booms.

• Dynamic Hoist: It is the main part to position, lift, and decreasing the load.

• Trolley: The motion can be anything like motorised, pneumatic, or manual.It carries the wire rope, chain, or hoist, and then hooks along the boom’s length.

• Rotation: On mast type and freestanding cranes, you may see a whole 360-degree rotation. On column and wall-mounted cranes, the maximum rotation is 200 degrees.

• Pneumatic/Electrification Power: Pneumatic rings or electric rings must be there for providing rotational assistance and then allow the whole rotation around the boom.

• Controls: On an air-powered or motorised system, you will have a push controller button for controlling the dynamic aspects. Variable-speed or multi controls are there for the trolley and the hoist.

• Hook Height: It depends on the application and your need. You should know about the lowest and highest obstruction details to fetch the perfect hook height.

• Rotational Stopping: If the jib crane is directly fit into any obstruction or wall, a rotational stopping would be there for limiting the crane’s motion before the occurrence of any collision.

• Other Environmental Facts: The crane parts are already galvanized for resisting any corrosion and provide lifetime stability to its parts. There is special control for protecting it from an explosion and other considerations such as dust, dirt, heat, and moisture.

The different systems include freestanding cranes, foundation-less cranes, mast type, wall-mounted, and articulating cranes.

All these types have specific applications and loading features. You cannot do any further manipulation to these operations. For capturing and visualising other details, you can prefer other online articles.