Digiprog works well on Audi a3 2011
by Xing Tu sales managerDigiprog V4.94 review :
I have a abrites 2014 clone.
Last week a have a Audi a3 2011 with a micronas cluster.
owner wants mileage calibration. i read out mileage and typ in new and press calibrate.
The cluster go's off and on a few times and then stays off...
I was f*ckt....
isnt there a way to fix the bootloader isseu with abrites?
or do i really need to Xprog 5.55 for fix?
other qeustion.
today a friend calls me and he also haves abrites 2014 and he did a mileage correction on his car
Vw polo 6r 2013 with a johnson cluster.
He read out Conf data and immo and saved it.
after that i try to calibrated mileage.
Cluster went off and stays off....
He freakt out and callt me.
i wass searching on the web and found that you have to do it severall times i try it bud no luck.
then i try to write back conf data and cluster is back on bud with old mileage.
i try with my abrites and the same problem...
both i use v21
I have been using it for 2 years now and these are the first problems I experience. however never worked with this counter until now.
before I order another one I would like to know what exactly is going on. and hopefully someone can tell me that too.
Recommend:
use digiprog3 read write milage and dach will back alive
Question:
digiprog fix the bootloader issues ?
Answer:yes work for my vehicle.i had 3 diferrent audi a3 and worked perfect fvdi is crap danger tool
Question:
do you also know about the johnson cluster from the polo 6r?
Answer:
not sure with Johnson control but every thing I have done with a digiprog has worked even when more expensive kit has failed
so digiprog with reasonable price and send fast .
Sponsor Ads
Created on Mar 6th 2019 03:17. Viewed 291 times.