Cisco CCDP ARCH 300-320 study guide|CertTree

by Karen Paramo IT sales consultant

300-320 exam tests a candidate's knowledge of the latest development in network design and technologies, including L2 and L3 infrastructures for the enterprise, WAN technologies, data center integration, network security and network services.

CertTree help you to find real Cisco 300-320 exam preparation process in a real environment. If you are a beginner, and if you want to improve your professional skills, CertTree Cisco CCDP ARCH 300-320 study guide|CertTree will help you to achieve your desire step by step. If you have any questions about the exam, CertTree the Cisco 300-320 will help you to solve them. Within a year, we provide free updates. Please pay more attention to our website.

Share some CCDP 300-320 exam questions and answers below.
Refer to the exhibit.



Based on the configuration, why are routers R1 and R2 not exchanging OSPF routes?
A. The OSPF process numbers are different.
B. There is no backbone area configured.
C. The router IDs are different.
D. OSPF is not enabled on the interfaces.
Answer: B

Which technology can block interfaces and provide a loop-free topology?
A. STP
B. VSS
C. VLAN
D. vPC
Answer: A

Which technology fulfills these requirements?
• Utilize a connection that must support a range of traffic, voice, video, and data.
• This traffic must also support transmission via a fixed blank 53-byte cell.
A. PPP
B. Frame Relay
C. ATM
D. MPLS
E. X.25
Answer: C

Given the addresses 10.10.16.0/24 and 10.10.23.0/24, which option is the best summary?
A. 10.10.0.0/16
B. 10.10.8.0/23
C. 10.10.16.0/23
D. 10.10.16.0/21
Answer: D

Which architecture provides a way to deliver end-to-end QoS as required by real-time voice and video business applications?
A. IntServ
B. DiffServ
C. LLQ
D. ToS
E. DSCP
Answer: A


Which multicast implementation strategy provides load sharing and redundancy by configuring intradomain RPs as MSDP peers?
A. anycast RP
B. auto-RP
C. bootstrap router
D. static RP
Answer: A


In which OSI layer does IS-IS operate?
A. Layer 1
B. Layer 2
C. Layer 3
D. Layer 4
Answer: C

Refer to the exhibit.



A network engineer manually reconfigures the BGP configuration on newly upgraded router R1.
However, the BGP neighbor relationship does not come up with the directly connected neighbor router.
What is causing the failure of the BGP neighbor relationship between routers R1 and R2?
A. An incorrect neighbor IP address for router R2 is configured on router R1.
B. An incorrect neighbor AS number is configured on router R1 for router R2.
C. The wrong BGP authentication password is configured on router R1.
D. Router R1 must configure the R2 loopback address as the neighbor IP address.
Answer: C

What is the next action taken by the Cisco NAC Appliance after it identifies a vulnerability on a client device?
A. denies the client network resource access
B. repairs the effected devices
C. generates a Syslog message
D. permits the client but limits to guest access
Answer: A


Refer to the exhibit.



Which functionality must be enabled on router A to connect two networks for translating private addresses into "legal" public addresses on a one-for-one basis?
A. PAT
B. NAT
C. VLAN
D. GARP
E. PPP
Answer: B

An engineer notices that many BGP peers utilize the same configuration parameters.
What can the engineer configure to simplify BGP neighbor statements and generate more efficient BGP peer updates?
A. peer groups
B. policy templates
C. session templates
D. peer address families
Answer: A

Which algorithm does IS-IS use to determine the shortest path through a network?
A. Bellman-Ford routing algorithm
B. Johnson's algorithm
C. Dijkstra's algorithm
D. Floyd-Warshall algorithm
Answer: C

Which technology extends Layer 2 LANs over any network that supports IP?
A. OTV
B. VSS
C. vPC
D. VLAN
Answer: A

A network administrator wants to provide high availability in a data center environment by making sure that there is no reconvergence of Layer 2 and Layer 3 protocols when there is a Layer 3 switch failure.
Which Cisco Nexus feature fulfills this purpose?
A. ISSU
B. VSS
C. vPC
D. MEC
Answer: C

Which practice is recommended when designing scalable OSPF networks?
A. Maximize the number of routers in an area.
B. Minimize the number of ABRs.
C. Minimize the number of areas supported by an ABR.
D. Maximize the number of router adjacencies.
Answer: C


CertTree Cisco CCDP ARCH 300-320 study guide|CertTree provide you with comprehensive Practice Test questions with precise and accurate answers. Cisco CCDP ARCH 300-320 study guide|CertTree are constantly updated to keep up with the current certification exam. CertTree Cisco CCDP ARCH 300-320 study guide|CertTree provide you with an opportunity to test your knowledge and skills in a simulated, certification-testing environment.We bring Cisco CCDP ARCH 300-320 study guide|CertTree prepared under the supervision of Certified Professionals. These Cisco CCDP ARCH 300-320 study guide|CertTree are simple and accurate in their contents resulting in best Preparation. Our free certification test technique makes you confident in attempting actual Certification Exam.

The Cisco CCDP ARCH 300-320 study guide|CertTree of CertTree can not only help you pass Cisco certification 300-320 exam and consolidate your professional knowledge, but also provide you one year free update service.Practice what you preach is the beginning of success. Since you have chosen to participate in the demanding IT certification exam. Then you have to pay your actions, and achieve excellent results.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Oct 11th 2017 02:18. Viewed 346 times.

Comments