Articles

CertTree NetApp NCIE-SAN NS0-507 study materials

by Karen Paramo IT sales consultant
CertTree guarantee exam success rate of 100% ratio, except no one. You choose CertTree, and select the training you want to start, you will get the best resources with market and reliability assurance.CertTree have the latest CertTree NetApp NCIE-SAN NS0-507 study materials. The industrious CertTree IT experts through their own expertise and experience continuously produce the latest CertTree NetApp NCIE-SAN NS0-507 study materials to facilitate IT professionals to pass the Network Appliance certification NS0-507 exam.
Share some Network Appliance NCIE-SAN NS0-507 exam questions and answers below.
Where do you identify the disk shelves and disks that are supported for a specific controller model?
A. Hardware Universe (HWU)
B. Interoperability Matrix Tool (IMT)
C. Disk and Aggregates Power guide
D. Installation and Setup Instructions poster
Answer: A

According to NetApp best practices, which method should be used for zoning?
A. Single initiator ¨C multiple targets
B. Multiple initiator ¨C single target
C. Single initiator ¨C single target
D. Multiple initiator ¨C multiple targets
Answer: C

You need to perform a DR test on a FAS8200 with SAN LUNs using the onboard UTA2 with 16Gb SFP+.
In this scenario, what is the minimum port speed required on the DR Site¡¯s FC switches?
A. 2 Gb
B. 16 Gb
C. 8 Gb
D. 4 Gb
Answer: B

According to NetApp best practices, which method should be used for zoning?
A. Single initiator – multiple targets
B. Multiple initiator – single target
C. Single initiator – single target
D. Multiple initiator – multiple targets
Answer: C

Where would you find the environment values of controllers and disk shelves (e.g. BTU and watts)?
A. Interoperability matrix tool (IMT)
B. Installation and setup instructions poster
C. Config advisor
D. Hardware universe
Answer: D

You are planning a migration from a 7-mode system running Data ONTAP 7.3 to a new AFF A700 ONTAP 9.1 system. This 7-mode system provides only FC LUNs for a Windows Server 2012R2 server farm. The 7-Mode system cannot upgrade its volumes to 64-bit.In this scenario, what would you use for the migration?
A. 7-Mode Transition Tool (7MTT)
B. Foreign LUN Import (FLI)
C. OnCommand System Manager
D. Unified Host Utility Kit
Answer: B

You have an iSCSI host that is unable to connect to an SVM that is named “svm1” over a LIF that is named “lif1”. The home node and port of lif1 is cl01-01 port e0e. The event log show command displays the error iSCSI: network interface disabled for use; incoming connection discarded.Which command would you use to solve the problem?
A. Broadcast-domain add-ports –broadcast-domain iscsi –ports cl01-01: e0e
B. iSCSI interface enable –vserver svm1–lif lif1
C. Network interface modify –vserver svm1 –lif lif1 –failover-group default
D. Vserver iscsi create –target-alias svm1 –status-admin up –vserver svm1
Answer: B

For which two vendor products would the Unified Host Utilities Kit set HBA and CAN parameters? (Choose two.)
A. Brocade
B. Cisco
C. Emulex
D. Qlogic
Answer: C,D

You have an iSCSI host that is unable to connect to an SVM that is named ¡°svm1¡± over a LIF that is named ¡°lif1¡±. The home node and port of lif1 is cl01-01 port e0e. The event log show command displays the error iSCSI: network interface disabled for use; incoming connection discarded.
Which command would you use to solve the problem?
A. Broadcast-domain add-ports ¨Cbroadcast-domain iscsi ¨Cports cl01-01: e0e
B. iSCSI interface enable ¨Cvserver svm1¨Clif lif1
C. Network interface modify ¨Cvserver svm1 ¨Clif lif1 ¨Cfailover-group default
D. Vserver iscsi create ¨Ctarget-alias svm1 ¨Cstatus-admin up ¨Cvserver svm1
Answer: B

Within the NetApp Interoperability Matrix Tool (IMT), which three components are supported for the FC SAN storage host solution? (Choose three.)
A. Host OS
B. IP switch
C. ONTAP OS
D. Netapp Controller Model
E. Host HBA
Answer: A,C,E

Referring to the diagram shown in the exhibit, what will happen when the SAS adapter in slot 2 on Node A fails?



A. Node A will continue to access all drives through the onboard SAS port 0a.
B. Node A will lose all access to all drives.
C. Node A will continue to access all drives through the Infiniband connection with Node B.
D. Node A will shut down until SAS adapter in slot 2 is replaced.
Answer: A

You are asked to create a volume and lun, both of which need to be thin provisioned.In this scenario, which two statements are correct? (Choose two.)
A. Use the lun create command with the space-reserve parameter set to disabled
B. Use the lun create command with the space-reserve parameter set to enabled
C. Use the volume create command with the space-guarantee parameter set to none
D. Use the volume create command with the space-guarantee parameter set to volume
Answer: A,C

You have expanded your ONTAP cluster from two nodes to four nodes and want to allow Linux multipathing software to see the paths to all nodes in the cluster.
In this scenario, which statement describes how to accomplish this task?
A. Add the WWPN to the host igroup then rescan from the host.
B. Rescan from the host OS and modify the reporting nodes to add the two new nodes.
C. Modify the reporting nodes to add the two new nodes the rescan from the host OS.
D. Rescan from the host OS then add the WWPN to the host igroup.
Answer: C

You are asked to create a volume and lun, both of which need to be thin provisioned.
In this scenario, which two statements are correct? (Choose two.)
A. Use the lun create command with the space-reserve parameter set to disabled
B. Use the lun create command with the space-reserve parameter set to enabled
C. Use the volume create command with the space-guarantee parameter set to none
D. Use the volume create command with the space-guarantee parameter set to volume
Answer: A,C

The Linux Host Utilities 7.1 configures settings for which three protocols? (Choose three.)
A. NFS
B. iSCSI
C. SMB
D. FCoE
Answer: A,B,D


CertTree 100% guarantee you to pass Network Appliance certification NS0-507 exam. CertTree CertTree NetApp NCIE-SAN NS0-507 study materials praised by the majority of candidates is not a recent thing. This shows CertTree CertTree NetApp NCIE-SAN NS0-507 study materials can indeed help the candidates to pass the exam. Compared to other questions providers, CertTree CertTree NetApp NCIE-SAN NS0-507 study materials have been far ahead. uestions broad consumer recognition and reputation, it has gained a public praise.

Sponsor Ads


About Karen Paramo Advanced   IT sales consultant

9 connections, 0 recommendations, 123 honor points.
Joined APSense since, July 15th, 2017, From New York, United States.

Created on Sep 29th 2017 03:42. Viewed 260 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.