Avoiding Undetected and Costly Leaks with Leak Detection Sydney

by Maria Williams Online Marketing Specialist

If you are worried you might have a slab leak or water leak, know that you can quickly locate and resolve the issue by hiring professional leak detection Sydney.

While fixing the problem is easier with the help of professionals, it doesn’t mean you should postpone it. Even completely unseen, small water leaks can ultimately cause water damage. Professional leak detection services can pinpoint the source of the leak without making holes in your walls or floors.

Why You Should Not Ignore Water Leaks

While it is important to conserve water, there is more at stake than water wastage. Although the only clue you leak might be a sudden increase in your water bill, many building materials quickly start to deteriorate when they soak up moisture. Wood warps and swells, and there is also increased damage risk to sheetrock. Apart from this, wiring can corrode as well. The source of the issue could be your dishwasher or something completely hidden inside a wall. A slab leak is when fixtures or pipes under a floor slab start leaking. Solving such a problem is expensive and disruptive, so you want to find the root cause of the problem, and you simply cannot ignore it.

Non-Destructive Methods of Leak Detection

Finding the source of the leak can be quite challenging. Tell-tale signs may be far from the site of water intrusion or plumbing problems. And you cannot afford to have plumbers follow their intuition and make one hole after another to track the symptoms back to the cause. The good news is, you don’t have to. Nowadays, leak detection services utilize state-of-the-art non-destructive methods to find leaks. The latest technologies are suitable for just about any situation. Here are some of the standard non-destructive leak detection methods used:

• Advanced Acoustic Method: This method uses a sensitive microphone, headphones, and amplifier to place an ear to the wall. Ultrasonic processes replace the water in pipes with a safe gas, e.g. nitrogen or carbon dioxide. Sensitive amplifiers and electronics convert the high-frequency hiss of that gas escaping into something the trained technicians can hear.

• Infrared Leak Detection: This method uses sensitive electronic instruments to measure the minor differences in temperature that dampness causes. It doesn’t have to be fresh from a cold or hot water pipe. Hours and sometimes even days later, damp evaporation and insulation can reveal the location of the moisture. For building water leaks, e.g. weather stripping, windows, roofs, etc., thermal imaging is an effective and fast method of surveying large areas instead of zeroing in on problem locations.

• Electronic Leak Detection: This method uses one or more devices to locate underground and indoor plumbing issues. A small radio transmitter is attached to the pipes to accurately trace where they run above ceilings, under floors, and inside walls. Other instruments work somewhat similar to metal detectors to pick up tiny differences in electrical conductivity caused by moisture.

Detecting water leaks is faster and easier nowadays, thanks to the latest technologies and methods that professionals use. The leak detection Sydney company is highly effective and helps you avoid the consequences of undetected, costly leaks.