Anti-static raised floor the primary technical indicators

Anti-static raised floor immediately after clicking on a bracket and beam overhead of anti-static floor, amongst the numerous decorative crafts, also referred to as electrostatic aerial ground surfaces. Raised floor, also called prefabricated floors.

Anti-static raised floor and overhead generated among the grass-roots level ground or floor space, you may not just meet the needs on the laying of cables and pipelines criss-cross, and by design, a raised floor inside the correct position to set the vents, you may also meet the needs of static pressure air supply air conditioning

two classification Antistaic Raised Floor  

Anti-static raised floor according to the substrate and the decorating supplies is usually divided into: steel, aluminum, laminate base, chipboard base  calcium sulfate, veneers can be anti-static tiles, Melamine and PVC. Ceramic Raised Access Floor 

Aluminum base, and sulfuric acid calcium base of price high, aluminum base of floor does not rust, but homemade of aluminum base board precision not high, imports aluminum base of price as well high; steel base and composite base moderate, but steel base board section easy rust, so section are needs brush paint do rust processing, composite base Board of section also to complete dust processing; Particleboard base of price tag reduce, but suck water price also higher, and fire efficiency poor, hosted low, not for demands higher of areas applying, so currently market Shang steel base and composite base of floor increasingly by welcomes. Wood Core Raised Floor 

Melamine  veneer very easily aging skin, easy to scratch the surface, easy to fall off the corners; PVC veneer much easier aging, well not easy cleaning following laying, the floor is simple to get older, cannot fire overall performance; when compared with the earlier two, anti-static ceramic tile surface for the best, not merely excellent fire functionality and is easy to clean, high wear resistance, aging resistance.

On account of their higher practicality, is expanding in recognition in the nation.

3 main technical index

Ceramic-metal composite anti-static raised floor surface is anti-static surface of polished tiles, Middle-base supplies  composite panels, the base is aluminum alloy plate, the surrounding conductive adhesive ring edge, anti-static, high wear-resistant, fireproof, damp-proof, smooth surface and sophisticated, robust resistance to dirt, laying flat and so on. Major technical index:

Electrical properties: System resistivity 10-10 Ohm

All steel anti-static raised floor

Spot welding of high quality cold-rolled steel plate stretch forming, spray antirust look outdoors the rationale, cavity fill foam cement, surface mount higher wear-resistant anti-static veneer , all studded with conductive side, in accordance with the load of classified as ultra-light, light, common and heavy duty flooring. Anti-static floor formed by beams, brackets and floor, beams and adjustable bracket with screws into the reduced part of the assistance system, the floor into a box consisting of beams.

Product positive aspects:

All steel composition, load capacity, fireproof overall performance; exterior spray, high wear resistance, corrosion protection, and anti-static, anti-pollution, easy to clear dust-cleaning; is cost-free to set up cable boxes within the floor, below alignment, interchangeability between the floor robust, versatile Assembly and simple to sustain.

Suitable for: laptop area, PABX space, electricity area, electrical energy space scheduling, weak motors, dustproof, antistatic cleaning workshop, overhead for the occasion.

Report this Page