Alloy Wheels and Their Advantages

by Jacob T. Digital Marketing Analyst

Alloy wheels - Introduction

Alloy wheels are the productive result of a mixture of aluminium and traces of other metals. These wheels are expensive as compared to steel-plated wheels but adds a charm to the vehicle and make it look more attractive. The wheels are primarily used in premium vehicles and increases the vehicle's overall value.

Advantages of alloy wheels

Wheels are attractive and add to the overall value of the vehicle.
Reduces the vehicle's unnecessary weight and result in better handling and acceleration.
Effective braking controls.
Durable because of the presence of aluminium and other metals.

How alloy wheels are better than the steel-plated wheels

Alloy wheels are easy to cast and are highly customisable in terms of painting, powder coating and wrapping; whereas, steel-plated wheels are not.
The mixture of aluminium and other metals is quite light; whereas, the steel-plated wheels are heavier in weight.
Alloy wheels ease-up the driving, and make it a more enjoyable experience during summertime; whereas, steel-plated wheels do not add any attractions like this.
Alloy wheels are quite durable and more attractive as well; whereas, steel-plated wheels seem like an old model of the wheels.

Steps to fit alloy wheels

In order to increase the life of alloy wheels, they must be installed accurately and adequately. Be sure that you have the availability of the right type of bolts required for fitting them onto your vehicle, as there is a variety of diameters, threads and seating. Along with the bolts, four plastic spigot rings are also required, that assist the wheels and the hubs.

Further, make sure to park your vehicle with hand brake engaged before jacking it up. Put the wheels adjacent to the car and confirm that all the bolts are aligned in the holes properly. Tighten the bolts and nuts and meet the requirements set by the manufacturer while tightening it up. The alloy wheels must be at least tightened up to 75% of the requirement.

Measurement of sizes

The sizes of alloy wheels are measured on the basis of their diameters. There will be an alpha-numeric reading over the tyre's sidewall which will tell you about the size of the alloy wheel it will fit on. For example, 205/45 R16, in this case, the radial diameter of the tyre would be 16 inches.

Damages in the alloy wheels

Alloy wheels can get chipped. Chipping is damage where small chunks/portion of the wheels fly out of the wheel. The wheels can also get cracked. These cracks are visible in the form of minor issues over the wheels.

Corrosion is one more type of damage to the alloy wheels. This comes into identification when the white dust particles become visible on the wheels.

How to avoid damages to the wheels

Avoid running and hitting the wheels over hard substances and rough roads. Try choosing the alternative way/route if possible. In case of no option left, try to drive your vehicle slowly through these roads.

Wheels UK might be the most preferred place to get the cheapest alloy wheels UK services and repairs. We have a number of specialists over here to guide you with the proper and accurate recommendations.

You can also contact us if you wish to buy excellent League Alloy Wheels.