Advantage for KESS V2 &KTAG&FG TECH V54

Kess V2 V5.017 Online Version No Tokens Limitation V2.23 Kess V2 OBD2 Manager Tuning Kit Auto Truck ECU Programmer

Software Version: V2.32, Firmware: 4.036

No Token Limitation: can be used to infinity, you no longer have to worry about tokens.

Supported languages: English, German, Spanish, Italian, Portuguese, French

Supports cars, trucks and engines (12-24V)

With coverage of all major brands and protocols, including Line, CAN, EDC17 and MED17 and For-d J1850.

Kess V2 contains everything you need to work successfully.

Features and backups:

Real-time control of battery voltage

Full recovery function in case of problems

Automatic correction of the checksum, (if available)

4 mode boot loader supported

Management of programming counters

ScanTool function to delete the DTC

Multiple read / write speed options

Option to write the complete file / section of the map

Full integration with ECM Titanium

KTAG

Software Version: V2.13, Firmware: V6.070

No token limit.

Multi-language support: English, Italian, German, French, Portuguese, Spanish

Support for BDM function, available protocols BDM MOTOROLA MPC5xx

Support car, motorcycle and truck calculator programming

features:

J-Tag, Motorola BDM / Nexus and Mitsubishi Bootloader / Infn Tricore / ST communication lines

BDM Motorola MPC5XX

14AS00T01S: Adapter to solder to the ECU

14AS00T02S: Cable with solder connector at ECU

14AS00T03S: Soldering adapter to the ECU

14AS00T04S: Soldering adapter to the ECU

14AM00T00M: Card for connection via a positioning frame

14AM00T01M: Card for connection via a positioning frame

14AM00T02M: Card for connection via a positioning frame

14AM00TBAS + 14AM00TB01: Card for connection through the positioning frame, with sliding tip 14AM00TB01

14AM00TBAS + 14AM00TB02: Card for connection through the positioning frame, with sliding end 14AM00TB02

14AM00TBAS + 14AM00TB03: Card for connection through the positioning frame, with sliding end 14AM00TB03

J-TAG Nexus MPC5xx

14AS00T05S: Adapter to solder to the ECU

14AM00T05M: Card for connection via a positioning frame

14AM00T06M: Card for connection via a positioning frame

J-TAG RENESAS SH705xx

14AM00T07M: Write card for connection via the positioning frame

14AM00T08M: Write card for connection via the positioning frame

14AM00T09M: Write card for connection via the positioning frame

14AM00T10M: Reading tip for connection via the positioning frame

14AM00T11M: Read card for connection via the positioning frame

INFOTRICORE BOOTLOADER

14P600KT04: Connection board for positioning frame

DISCHARGEUR ST10

14AM00T03M: Card for connection via a positioning frame

FGTECH Galletto

Master V54 Version

2.Can be used directly without activation

Multi-languages: English, Italian, German, French, Spanish, Portuguese, Czech, Turkish

FGTech V54 supports BDM and Tricore functions.

5. Supported system: Windows XP

DO NOT FORGET TO UPDATE THE FIRMWARE ONLY, not the software

System in TriCore start mode

NEW JTAG - BDM - MOTOROLA - FREESCALE -

Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2 - Mair 8G MF

New Delphy DCM3.5xx DCM3.7xx TRW

Motorola Freescale MPC 555/556/561/562/563/564/565

Motorola MC 68332 - MC YQQCU - MC 68377 Trionic 5/7/8 G-M OP-EL-SAAB

Motorola MC 68376 Campi 01 Lamborghini - Lotus

Motorola MC 68336 MEMS D5 ROVER

Motorola ZC 439615 - ZC 439507 IAW Fi-AT - V- AG

New OBD VPM protocol line G - M - Hummer-Corvette-Munstang-Blazer-Cadilac

Protocols OBD new Tx-Rx line - Supercar - Mitsubischi - Hitachi - Denso ecu

All EDC17 MED17 is good always modify with tricore boot mode.

Automatic checksum

All old protocols included from B-osch MExx / EDCxx / Marelli / Siemens / Delpy / Lucas / Denso

C167x / ST10 start mode, boot mode in Tricore with Bosch password, Siemens

Motorola MC68332 - MCYQQCU - MC68377, MC68376, MC68336, ZC439615, ZC439507

Motorola Freescale MPC 555/556/561/562/563/564/565

Freescale MPC 5553/5554/5565/5566

BDM Tricore.

5-30V car / industrial vehicles, L / K line, KWP, CAN

Can Bus V2.0 50KB> 1000KB

J1850 PWM PWM G - M - F - ORD

Rx Tx RS232,

RS 485,

Automatic configuration Pull line KL 250, 500, 1000 ohms,

Termination of the automatic configuration can bus 0, 60,120 ohm

https://www.ebay.com/itm/Kess-V2-V5-017-Red-PCB-Online-Version-V2-23-Ktag-7-020-V2-23-Red-PCB-EURO/263563632264?hash=item3d5d9dde88:g:ODUAAOSwhuxasxxU

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Aug 13th 2019 22:32. Viewed 418 times.

Share on APSense

Comments