5 Vital Precautions to Take When Working with PCBs
by Melriya Techsolutions MELRIYA Technical SolutionsSummary: Learn about the 5 precautions which
you need to take when working with printed circuit boards. Take into
consideration the precautions and ensure safe working with PBs.
When
you are working with printed circuit boards, it needs constant precaution and
care. Whether it is during the time of assembly or at the designing stage, the
chances of electronic shocks, glitches or other unforeseen problems are high.
So, it is imperative to take some precautions to ensure efficient work with
hard gold PCB. Following are a few easy steps that will help you in working
safely and securely with circuit boards.
When
working with printed circuit boards wear safety goggles
If
you wear safety goggles when working with gold plating PCB or during Ac/dc drive repair, it will ensure that
no broken off metal plate enters your eyes. At the same time, during chemical
etching, the safety glasses will shield your eyes from harmful fumes.
Use
pins and forks for working with tiny size electrical components
To
perfectly position the miniature electrical components in their adequate places
in the printed circuit board, it is advisable to handle them with the use of
pins or forks. Additionally, if you try to position the tiny electrical
components with your bare hands, there is high probability of you breaking or
damaging the instruments.
Do
not work in a dark room
Always
remember the fact that hard gold PCB is an extremely intricate device; so you
need handling it with great care and safety to avoid any damage or breakage. It
is therefore advisable not to work in a shady or poorly lit room. Instead, open
the windows or move away the blinds of the room to let natural light come it,
or make the use of ample artificial light to properly light up the room.
Moreover, ensure that there is enough space to work properly while assembling
or disassembling the components.
Make
the use of correct power source
Wear
Hand Gloves when working with chemicals
When
you etch gold plating PCB, it needs use of strong chemicals. Do not work bare
handed as it cause considerable damage to your skin. So, it is advisable to put
on hand gloves when etching a PCB with the use of chemicals.
Aforementioned
are some of the vital precautions which when taken you can safely work with a
hard gold PCB. Search for a renowned Automation repair Company UAE to do
effective repair works.
Sponsor Ads
Created on Jan 15th 2018 23:20. Viewed 322 times.