Sony XL5100

by Geo Martin

Enjoy your new TV or projector, and make sure you have a Handy Backup Sony XL5100 replacement lamp if the lights go out suddenly.

Recommended Features

Sony XL5100
Replacement
Lamp

Learn more about Sony XL5100»

Review on Sony XL5100

Sony XL5100 replacement lamp is designed for the projection of light. Sony Grand WEGA series is using Sony XL5100 replacement lamp. The model number of TV, depending on the size, the KDS-50A2000, KDS-55A2000 and KDS-60A2000. Replacing the lamp is not difficult, according to the instruction manual Sony Wega, even if you should take some precautions to avoid burning or damaging of the Sony XL5100 Replacement Lamp.

Press "Power" to turn off the TV. Wait five minutes, then remove the cord from the electrical outlet. Wait 30 minutes for the old lamp until it is cold. Press the two tabs on the rear access panel. It is on the right side of the TV. Pull the panel towards you. You will now see an old lamp. Turn the screw of the lamp to the left a few turns with the screwdriver. The screw does not come out. This relaxation allows you to remove the lamp. Push the lever next to the screw clockwise to unlock. Grasp the handle and pull the lamp. Open the package of new Sony XL5100 Replacement Lamp. Inserted into the slot. Do not touch the projection lens. Push the lever to the right to block the light. Turn the screw. Replace lid and press until it clicks. Connect the TV again and again.

Related to Sony XL5100

SONY XL-5100 Lamp Replacement Video/Guide
Sony, XL-5100, DLP, Lamp, enclosure, replacement, guide, how, to, help, assistance, simple, steps, 2-633-476, 2-633-475, AM0000184, KDSR50XBR1, KDSR60XBR1

Sponsored by: www.Discount-Merchant.com - Sony DLP Lamp XL-5100 Replacement Guide Manufacturer Sony Part Number: XL-5100, 2-633-476, 2-633-475, AM0000184 Compatible TV models: KDSR50XBR1, KDSR60XBR1