Fabric Vertical Flammability Tester

by Ivy Xie Sales Manager

This tester is applicable to all kinds of textile material of flammability test; Suitable for single component or multi-component (coating, quilting, multilayer, laminated products and similar combina

Recommended Features

The ignition time setting range: 0 ~ 99.99 s The combustion timing range: 0 ~ 999.9 s
The ignition time setting range: 0 ~ 99.99 s The combustion timing range: 0 ~ 999.9 s
The test flame height: 20 mm / 40 mm

Learn more about Fabric Vertical Flammability Tester»

Review on Fabric Vertical Flammability Tester

Fabric Vertical Flammability Tester
Description of the instruments:
Fabric Vertical Flammability Tester is applicable to all kinds of textile material of flammability test;
Suitable for single component or multi-component (coating, quilting, multilayer, laminated products and similar combination) clothing, including cold tent curtain antependium and large tent and door cover textiles vertical flame spread to the determination of performance;
Suitable for surface with hairs (such as raising, terry, tufted or similar) on the surface of the textile fabric burning time determination;
Suitable for all kinds of single layer or multi-layer (such as coating, quilting, interlayer and similar combination) the fabric of the vertical direction of the ease of ignition tests;
In the laboratory test results can only be used for evaluation of control under the condition of material or combination of combustion performance. Enough oxygen to test results do not apply to the occasion or heating time is too long in the fire.
Operating principle:
Install the finished product sample or material sample on the corresponding fixture of the instrument, with the requirements of the flame sample time, record the related data (e.g., burning time, burning rate), to evaluate its combustion performance.
Specifications:
The ignition time setting range: 0 ~ 99.99 s
The combustion timing range: 0 ~ 999.9 s
Fire mouth Angle: with the horizontal Angle: 0 / 30 , 90 can be adjusted
The test flame height: 20 mm / 40 mm
U-shaped clamp frame: 80 mmx600mm
U-shaped clamp tag line location: adjustable
Combustion gas: butane gas
Volume (WxDxH) : 80X55x66cm
Weight (about) : 45 kg
Power supply: 1 AC 220V 50Hz
Test Standards:
BS EN ISO 6940,EN ISO 6941GB/T 5456, GB/T 5456,8745, GB/T 8746