YIFAN Machinery PF Series Impact Crusher

PF Series Impact crusher Introduction: (http://www.yifancrusher.com/crusher/Impact-Crusher.html)

PF Series Impact Crusher is a new product on the basis of absorbing domestic and foreign advanced technology carefully designed. The family of devices can handle particle size of not more than 500 mm, not more than 320 MPa compressive strength materials (granite, limestone, concrete, etc.), the impact crusher for its excellent performance and good performance, widely used in the production of high-grade roads, water, electricity, artificial aggregates, crushing, construction and other industries with stone.

PF series impact crusher feed size ideal for 100-500mm, shall not exceed the specified value. Discharging granularity user according to need to adjust the hammer and the counter plate, the average gap between the setting member is reached.

Impact crusher works:

The PF series by impact crushing materials, work, driven by the motor, the high-speed rotation of the rotor of the impact crusher material into the plate hammer on the rotor impact crusher, and then be countered to the liner again broken Finally, from the discharge port. The user can adjust the gap between the counterattack frame and rotor frame can be reached to change the purpose of material discharging size and material shape.

Back-breaking performance characteristics:

 

[1] Multi-cavity uniform crushing, suitable for crushing hard rock;

[2] low feed inlet, ease of production line layout and increase the size of the feed;

[3] new wear-resistant material of the plate hammer, counterattack plate and liner last longer;

 

[4] High chrome hammer, unique counterattack lining, especially suitable for hard rock crushing, energy efficient;

[5] Hard rock crushing, energy efficient;

[6] Are the entire board structure, nesting was small particle size and the cube-shaped, without internal pattern;

[7] Cubic shape nesting particle size adjustable;

[8] simplified crushing process;

[9] full hydraulic opening, ease of maintenance and replacement of wearing parts.

Report this Page