Articles
Xtool X100 PAD2 Adds Audi Q5 Spare Key via OBD
by Alex Carter Mechanic Assistant How-to: program Audi Q5 5th generation immobilizer key using Xtool X100 PAD2 via OBD. Both add key and all keys lost are available. Here's the guide on adding a spare Q5 key with pad2.Device required:
Xtool X100 PAD2 pro with KC100 adapter in default
A working key
A new key to be programmed
Procedure:
In X100 pad2, select VW-> 4th/5th Immobilizer system
Turn ON the ignition with one working key
Select 5th Immobilizer System
Select Match the Key-> Read Immo key data
Enter the file name to be saved
Turn the ignition on
If lost all keys, open the car headlights, the brakes and then confirm,
Wait for data to be read
Read data completed
Press Show Immo data to check the security data
Now select Make Dealer Key
Plug the KC100 adapter into xtool x100 pad 2 tablet, press OK to continue
Select key type: Create A4/A5/Q5 Key
Put a key that ready to add to kc100's coil
Creating key
Writing key
Make dealer key success
Take out the key from KC100 adapter
Select Match the key and input the number of keys to match: 2
Turn the ignition on
(All keys lost: Insert one dealer key into ignition switch to make it close to the induction coil)
Key in ignition will automatically get matched and stored in position 1 of 2
Now remove the key and insert second key to match that in position 2 of 2
Exit key learning
Match the key finished
Check the key for working.
Done.
www.obdii365.com
Sponsor Ads
About Alex Carter 
Mechanic Assistant
45 connections, 0 recommendations, 438 honor points.Joined APSense since, July 23rd, 2015, From Carlifornia, United States.
Created on Jul 13th 2020 01:12. Viewed 344 times.
Comments
No comment, be the first to comment.
