Why You Should Re-Sanding Your Timber Floors?

by Steve Smith Latest News and Blog

Sanding is a process that can be used to remove scratches and stains from timber floors. It’s also useful for restoring the finish of old boards and bringing them back to life. When you sand your timber floors, there is a chance that the color of your flooring will change.

This is because the old finish on your floor was either wax or polyurethane. Wax finishes are lighter and may yellow over time as they oxidise, while polyurethane finishes are darker and don’t tend to be yellow as much.

This guide will explain getting Timber Floor Sanding in Melbourne is essential, how it works and whether you should consider doing it yourself or hiring a professional.

Timber Floor Sanding Melbourne

What Is The Process Of Re-Sanding Timber Floors?

Sanding timber floors is the same as when you first get your floors sanded. It's a hands-on, manual process requiring significant time and labour investment. Generally speaking, floor sanding requires a professional to come into your home and spend anywhere from one week to three weeks doing the job.

The time frame will vary depending on how many rooms they need to do and whether they need to take breaks between rooms. If you have pets or children (or both!) living in the house while this work is being done, it's important that they be kept out of harm's way.

That means no playing or running around where people are working with power tools like circular saws and belt sanders—and it also means no eating snacks!

How Does It Change The Colour Of Your Timber Floors?

On many timber floors, the colour is often uneven and patchy. This means that there are sections of the floor that are darker than others. When you re-sand your timber floors, it will remove the existing finish and sand back down to the bare wood. It will also allow you to apply a new finish on top of this, which gives you a deeper and richer colour that is more consistent across your floor.

What Are The Benefits Of Re-Sanding Timber Floors?

Re-sanding is the process of sanding the timber floor to remove the existing finish and expose the natural timber. This can be done by hand with different grades of sandpaper or by using an electric sander. The process varies depending on the type of wood in your flooring.

Re-sanding will improve the appearance of your floor by removing any scratches, dents or marks that were created during installation or through everyday use. It will also remove stains from spills on your floor and give you a new fresh look that’s more appealing than before.

Re-sanding will improve durability because it removes all previous finishes from your floor so they won't continue to chip off over time like non-re-sandable floors do after they've been installed for a few years, which means less money spent replacing them later down the track when they start breaking up!

Because re-sanding removes old finishes like waxes etcetera there is no need for repeated applications so fewer chemicals are used, meaning better air quality too!

Whom Should I Hire To Do The Job For Me?

You will want to hire someone who is experienced to get timber floor sanding in Melbourne job done for you. The person you hire should have experience in your area and have a good reputation. They should also be well-recommended by people you know and trust.

Conclusion

After you have taken the time to read this blog post, it is now time for you to make your decision on whether or not re-sanding your timber floors is the right choice. The process of re-sanding timber floors can be a very expensive one but if done correctly will provide many benefits such as increased strength and durability.

We recommend that before making any decisions about whether or not this is right for your home, contact an expert contractor first who will give them advice based on their experience of doing this type of work many times over!