Why need to buy P001 programmer for OBDSTAR X300 DP ?

OBDSTAR company release new product again , why need to buy P001 programmer ?

for Renew Used Key to be Blank One for Programming New Key. 

1. Programmer P001 for OBDSTAR X300 DP Plus Features:

Based on the characteristics of the original adapter, the P001 programmer, integrated with the EEPROM adapter, the RFID adapter and the Key Renew adapter, is a multifunctional programmer.

It brings a whole new experience, which not only allows automotive technicians to reduce the more cumbersome procedures, but can also be compatible with smart keys simulated to achieve the all-lost Toyota.

P001 programmer uses two coils with a stronger signal, supporting a wider range of RFID. It is also required in recent model upgrades, as follows:

Ferrari 458 / F12 / F149;
Maserati mechanical key;
Fiat 500 / Viaggio / Palio / Siena / Boyue / Pailang / Ottimo, etc.
Iveco;
Alfa Romeo;
Volkswagen MQB;
Toyota 5 simulated cards;
BMW;
Porsche;
2. P001 Programmer Configurations

Programmer P001:

P001 programming unit + C001 circuit board + C002 circuit board + W001 data cable + W002 data cable + W003 data cable + Toyota simulated smart keys (free);

Note: The P001 Customer Purchase Programmer can get a set of Toyota simulated smart keys for free.

3 .P001 Accessories for programmer

Accessory 1: C001 printed circuit board

The printed circuit board C001 is compatible with the old NO. 3 and 4 printed circuits, applying to the EEPROM chip dismounting and reading, Tianjin FAW and VIZHI immobilizer coil initialization and other functions.

Accessory 2: Circuit board C002

The newly developed C002 printed circuit board is connected by W001, W002 or W003 without soldering the chip.

Accessory 3: W001 data cable

The W001 data cable can read or write data by connecting the chip with a wire

Accessory 4: Data cable W002

The W002 data cable can read or write data by clamping the chip (SOP 8-pin) directly without welding EEPROM.

Accessory 5: Data cable W003

The W003 data cable can read or write data by clamping the positive and negative poles with red and black pliers and by contacting the data interface with yellow and blue probes.

4. Wiring instruction

To better understand the connection between the P001 programmer and its accessories, examples of wiring instructions W001 and W003 are as follows. (During the actual operation process, there is a wiring diagram inside the tablet)

Way 1. W001 Sign in

Way 2. W003 Sign in

About the Toyota simulated smart key

Q: Why use a Toyota simulated smart key?
A: For 2007-2016 Toyota / Lexus models, if all smart keys are lost, the instrument table must be removed and the ECU replaced. The cost is very high!

This Toyota simulated smart key can generate a Toyota key with our devices in the case of all lost keys, so that the ignition switch can be turned on, then a new smart key can be added and programmed with our devices.

What are the benefits of the Toyota simulated smart key?
Save costs
reusable
How many types of smart keys simulated by Toyota in total?
There are 4 types currently, and the 5th is in development.

What kind of smart keys can we simulate?
The simulated key 1 applies to the vehicle with a type 94 / D4 smart key;

The simulated key 2 applies to the vehicle with 98 type of smart key;

The simulated key 3 applies to the vehicle with a type 88 / A8 smart key;

The simulated key 4 applies to the vehicle with an A9 type intelligent key;

Connection method for activation of the instrument (as shown below)

For more details information, welcome to Add my Whatsapp (+86 18124509953 , Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

Xingobd2

Email : admin@xingobd2.com

Skype : +8618124509953

Whatsapp : 0086 18124509953

Website : www.xingobd2.com

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jun 29th 2018 03:17. Viewed 438 times.

Share on APSense

Comments