What problems you might face when sealcoating driveway in winter season

For people who are looking to sealcoat their driveway should wait for the winter season to end. This is because winter is not considered to be the preferable time to indulge in this activity for several reasons. One of the major troubles it can cause is that when the parking area is covered in snow, then it becomes difficult to identify the areas of damage present on it. This is the reason why several asphalt based sealcoating contractors recommend their customers to perform any urgent driveway repair work either in the fall, spring, or summer season.

Factors that causes issues in sealing driveways in winters

Driveway sealing is impacted by different factors at a place such as low temperatures, humidity levels, and particular time of day in which the job is done. For best results, one should carry out the task in the months from May to October.

Challenges due to increased humidity levels

It is very essential to check the level of humidity in the air. It should not be more than the permissible limits. Higher levels of humidity imply increased amount of moisture in the air. This can delay drying of the driveway and browning of the brand-new surface of the sealcoat. Problems in setting of the coating and reduced durability can happen when one performs the task in areas that witness high humidity.

Temperature

Precipitation and cold weather season are both the factors that interrupts the proper execution of the sealing of driveway. You need to ensure that the sealing temperature of the driveway is kept at their optimal level. When planning to seal the driveway using asphalt, then ensure that the temperature should be near about 10 degrees Celsius after application of the sealcoat. At the time when the driveway dries, it is necessary that the temperature of the asphalt remains fixed at that temperature or can rise to aid in successful drying.

Time of the day

Many people have this question as to whether day time is more desirable for sealing work or night time. For efficient accomplishment of the sealing task, it is necessary that adequate amount of sunlight is present throughout the process. Thus, early morning on a bight sunny day is the best time to carry out this task.