What do you need to pay attention to waterproof watches
by HongRong L. ceramicslife(1) waterproof watches apron
easily deteriorate, and should be changed regularly, or be replaced at each repair.
(2) waterproof watches sheet glass damage can
be affected, appears damaged should be replaced.
(3) do not wet
in water ,the waterproof watches crown operation, to
prevent water entering the machine
watches.
(4) after being used to push the crown in
the end, the crown should pay
attention to the turnbuckle lock
on the waterproof watches, without leaving a gap.
(5) waterproof watches stained water should always dry.
(6) to prevent contact
with chemical substances waterproof
watches, otherwise it will affect
the case and waterproof apron,
reducing water resistance.
(7) Do not place the
waterproof watches in high
temperature (ten 60 ℃) and low temperature (-10 ℃) environment for a long time.
(8) If the water mist
spots inside the waterproof watches,
should be promptly removed to avoid
mechanical rust.
waterproof watches structure
1, Waterproof watches structure. It seams and screw-type differences, that is threaded bottom
of the waterproof watches, the main frame and the bottom shell has
a concave-convex notch another bite report.
Selection structure found only in "Tissot" brand watches
2, screw tightened
waterproof watches structure. This is
the most common and most waterproof
watches a domestic table adopt this
structure. It features a cover
and case with screw
connection and pressure sealing gasket, cover
edge after 0
8,10,14 a symmetrical
corners, etc., can be used to open
the table is being
opened. Soviet "flying",
"Russia" and other brands,
although non-threaded end, after another
threaded ring closure
should also belong to this category.
3, withdrawal pressure
waterproof watches structure. Bottom
is a concave
steel bowls, waterproof watches machine mounted on steel
bowl, pressing on
tight circle and table Mongolia, the main shell frame closely linked to the case, waterproof performance is
good. It is characterized by the
case no thread, cover is rounded
polygon, edge cover
gasket, by squeezing
tight fit, available blade to pry open. Just
chord stem (commonly
known as unsolicited bar) for double pole,
convergence at easy storage rust. Import
"Swiss watch" many as such.
4, knife exposing
cover waterproof watches structure.
This water table is
often overlooked by people
mistakenly believe that the general table. Although
it was the same as ordinary
table knife bowed
back cover, but is
much more stringent, waterproof watches handles, cover the same
pad rubber band, also can play the role of water.
The famous "Armani watches have adopted such a
waterproof watches structure.
waterproof watches Specifications
General specifications waterproof watches divided
into the following categories: 30
m, 50 m, 100 m, 300 m, 500 m.
30 m: refers to the general living water that splashed
water droplets when washing hands, as well as the next rain falling rain,
but can not pay
attention for too long, can not
be worn in the sauna.
50 meters: 30 meters and no difference can
be ignored.
100 meters: you can take him wash, shower,
but not soaked in
water.
300 meters: for swimming activities, but only applies to shallow swimming.
500 meters: This level can only be submerged, is
200 meters or so, but do not do according to the
predetermined value, it is probably
the limit you can
afford the watch, so do not use
this method to test the
performance waterproof watches.
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.