Articles

What are the things to check before calling furnace repair professionals?

by Justin Langer Content Manager

To be precise, you just can’t afford to have a malfunctioning furnace at home- especially during the cold winter days. We usually feel nervous and confused when the furnace system breaks down and doesn’t offer the desired output. However, being calm and relaxed would help you to avoid various types of common problems associated with the furnace. Note that the furnace repair technicians would promptly visit your home to eliminate problems. But as a responsible user, you should possess some basic knowledge about furnace repairing. So here are the top things to check before calling the furnace repair professionals.

Check issues with the filter

One of the most common furnace issues is related to the filter. Quite interestingly, as homeowners, we often tend to forget about them. A filter is designed to clean the air which goes into the furnace and the heated air that is circulated inside the house. In case the filters are clogged and dirty, there is difficulty in the process of air circulation. This is also the reason behind heat build-up in the furnace. Check for damages to the filter by listening to the furnace when it is switched on. If you hear a whistling sound, then probably something is wrong with the filter.

Analyze the condition of the circuit breaker

If you have not discovered anything wrong with the furnace so far, the next spot to look for is your home’s fuse box. In case you have a separate circuit breaker installed for the furnace, there would be no issues. You can open the box and check whether the circuit breaker has stripped down or not. On the other hand, if you don’t have a separate circuit breaker installed, calling an electrician to identify the switch would be a wise decision. Proper labeling of the appliances in the circuit breaker box can help you to find the circuit breaker in future easily.

Checking the Pilot Light

Older models of furnaces often have pilot lights. If you are lucky enough to have the user manual of the furnace, you can go through the instructions of switching it on and off. By following the instructions, you should be able to accomplish it on your own. But if you are feeling uncomfortable, it’s better to call the technicians. The furnace service technicians would attend to your call swiftly and visitor your house to check for underlying issues.

You can check out the site https://www.furnacetoronto.ca/ to contact Toronto Furnace Repair, which is one of the best sources for heating and air conditioning service in Etobicoke, East York, Scarborough, Richmond Hill, Woodbridge, Markham and Thornhill, including up to code installations in the GTA.

 

It is always better to exercise caution whenever you are handling appliances like furnaces. These are high-voltage appliances, and a minor mistake can lead to danger. It is always better to call for professional help who can make sure that your appliances are in service properly.  


Sponsor Ads


About Justin Langer Advanced   Content Manager

27 connections, 3 recommendations, 285 honor points.
Joined APSense since, December 21st, 2019, From almaty, Asia/Pacific Region.

Created on Oct 9th 2020 20:20. Viewed 242 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.