What Are Some Different Types of Rod Cutters?

by Austin W. Marketer

“There are a wide variety of rod cutters used for the industrial purpose. Read this article to know more about them”.

There are different kinds of rod cutters for cutting the rods. All these cutters look different, but the hydraulic bar straighteners have similar components such as base, handle and dies. Most of them work in the same way, while some in different ways. The manual rod cutters take time to cut the rods, but the hydraulic upsetting press machine or electric one takes less time. If you want to know about different types of rod cutters, then read the article below:

Manual Rod Cutter

This is the most common type of rod cutter, which is well-dimensioned and small. It works based on the gear-level transmission principle. It pressurizes the rod directly to shear and breaks it. The sliding part is placed between the body, so it doesn't get out of the line. This way, it keeps the frictional losses to a minimal level and makes the efficiency to its maximum level using most of the operator's effort. It uses the retaining spring securely so that it can prevent accidents.

Chop Saw

In rod-cutting tools, the chop saw plays an important role. The mitre saw and chop saw are almost similar, but the only difference lies between its blades, while the edge of the chop saw is 14". In that case, you must adjust the device's speed and cut through it. The chop saw is one of the best options for cutting steel rods in maximum quantity. Apart from its structure, it can also create a smoother and clean cut than others.

Hydraulic Rod Cutter

A hydraulic rod cutter is also known as cold-cutting shear because it doesn't create sparks when cutting. The hydraulic Rod cutters don't use abrasive blades and cutting torques like the others and are mainly used in the construction industry. The primary benefit of hydraulic rod cutters is that they are lightweight and portable, providing an easy and convenient usage option. Besides providing you productivity, it reduces the risk by involving more electric power than manual.

Electric Threaded Rod Cutter

The electric threaded rod cutter generally gets its power from the battery, just like the hydraulic rod cutter, and it can deliver up to 400 cuts using a brushless motor. It rotates the cutting dies and can cut rods in multiple sizes quickly. Using the electric rod cutter, you can get precise and smooth cuts.

During the cutting process, the hydraulic upsetting press machine uses its optimized blade geometry and cut speed. The primary benefit of using an electric threaded rod cutter is that using it, you can prevent chips and sparks.

Manual Rod Cutter Scissors

The manual Rod Cutter Scissors use two arms when making their cutting operation. The process is much like a scissor; it's named like that. In this process, the worker usually fixes one arm to give support and the other to move to cut the rod. In that case, the longer the process will be, pneumatic combination steel strapping tool will require less force for cutting the rods. Apart from rods, it can also cut bars with small diameters.

Conclusion

Here are five different types of rod cutters that are used for cutting rods and bars. These cutters are generally used at construction sites. If you are confused about choosing one for your project, get guidance from the hydraulic bar straightener manufacturer. Hopefully, they will guide you in the best way possible.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Jun 21st 2023 06:58. Viewed 87 times.

Comments