Articles
Ways to Set up an HP Officejet 3600 Series
by John Handson Drivers About the HP DriversThe HP Officejet 3600 series printer not simply prints documents, nevertheless it also scans, copies and sends faxes. To be able to correctly set up the printer on a laptop, you may ought to not just set up the HP 3600 Series printer's driver but in addition setup the hardware properly. Should you have currently setup and installed the printer on a further pc in your network, then you definitely will really need to just run the installation application around the printer's installation CD.
Directions
1. Unfold the printer's input and output trays. Unwrap the print cartridges if they may be new, and set up them within the cartridge carriage underneath the front cover.
2. Close the printer's front cover, and plug within the energy cord. Load paper inside the input tray, and turn the printer on.
3. Align the print cartridges by pressing the "OK" button around the handle panel. Load the printed alignment web page face-down inside the scan input tray, after which press "OK" to test the printer's scan functionality.
4. Insert the installation CD into your computer's optical drive. Stick to the onscreen guidelines, which differ based on your computer's operating method.
5. Plug the printer's USB cord and telephone cord in when the installation software program indicates. Make certain to plug the telephone cord in to the jack labeled "1 Line" around the back of your printer.
Sponsor Ads
About John Handson 
Drivers About the HP Drivers
10 connections, 0 recommendations, 39 honor points.Joined APSense since, September 4th, 2013, From shenzhen, China.
Created on Dec 31st 1969 18:00. Viewed 0 times.
Comments
No comment, be the first to comment.
