Articles

UVECO EV-1 Sterilizer for Covid-19 tests | DAESUNG ELEC

by Professional Writer Professional Writer

DAESUNG ELEC is a specialized in producing UV LED Sterilizers that can help disinfection from internal buttons, such as elevator floor number and bus stop buttons.

Recently, due to rapid changes in the electronics industry, communication devices, computers, broadcasting devices, etc. Many electronic devices are newly developed and degenerated and are walking the path of iteration. Therefore, interest in and research on printed circuit boards, which are the basic parts of these electronic devices, are being actively conducted.

UVECO EV-1 sterilizer

Elevators are used by up to hundreds of people a day in shopping malls, supermarkets, hospitals and apartments.

Features of UVECO EV-1 Sterilizer:

  • Can be installed with existing facilities.
  • Improvement of difficulty in reading braille for the disabled when using the antibacterial film.
  • Periodical gaps for sterilization.
  • Promotion to attract customers and secure stability.

Sterilization Test - COVID19 Test Results and Sterilization Power:

  • Test light source: UVC LED - 275nm 10mW / same module as UVECO EV-1 UVC LED
  • Test distance: Distance between light source and virus 200mm(Within about 50mm distance between UVECO EV-1 and elevator button)
  • Test result:30 sec – 90% / 90 sec – 99.9% sterilization immediately after exposure to light source
  • UVECO EV-1: When the distance to the sterilization point is within 50mm, 99.9% sterilization power is confirmed within 12.5 to 15 seconds. The products repeat sterilization for at least 30 seconds when motion is detected.

If you are looking for an elevator button UV sterilizer, you can find them at DAESUNG ELEC.

Click here to contact DAESUNG ELEC.

View more: DAESUNG ELECUVECO EV-1 Sterilizer


Sponsor Ads


About Professional Writer Freshman   Professional Writer

0 connections, 0 recommendations, 46 honor points.
Joined APSense since, May 10th, 2017, From Seoul, South Korea.

Created on Feb 1st 2023 05:02. Viewed 61 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.