Understanding the Working of Various types of Hayward Filters

Posted by John Marry
6
Oct 18, 2012
541 Views
Image Hayward is the manufacturer of different types of pool filters for an efficient filtration system in the swimming pools to keep the water clear and free of debris. There are basically three types of Hayward filters – cartridge, diatomaceous earth and sand filters. Each of these filters follows different filtration technique but at the end achieve the same goal of keeping the pool water clean and hygienic. These filters are becoming a popular choice among the people as each types of filter has the capability of trapping particles as small as dirt, soil, bugs and other small debris that normally pass through a skimmer basket. However, it also required to backwash these filters regularly such that they can deliver peak performance especially during the season for swimming.

As mentioned earlier each filter holds a different mechanism for cleaning. Below is some information regarding the types of Hayward swimming pool filters and the techniques that they use to keep the pool water clean and clear.

Diatomaceous Earth – DE filters look like very long thin fingers and consist of approximately seventy finger types of eighteen inches in length which are coated with diatomaceous earth. The water passes through the finger filtration system allowing the smallest of the dirt particles to get trapped in the layers of DE. However, over the time these fingers get filled with all the dirt and debris of the pool water and hence demand a thorough cleaning. A thorough cleaning can include removing the old DE and replacing it with a new.

Sand filters – this is another category of Hayward swimming pool filters which are cleaned by forcing the pool’s water to flow through a layer of sand which catches the dust particles. Although the sand filters are not capable of trapping particles as small as DE filters, this filter is capable of removing dirt particles that are about twenty to forty microns in size. The major benefit of sand filters is that they can effectively clean pool water for several years without having to change the sand. However, backwashing the filter every few weeks is sufficient for clean pool water.

Cartridge filters – these are the least expensive Hayward filters and their advantage is that there is no need to add sand or earth to the filtration system. When compared with sand and DE filters in which you either have to backwash the sand or add new earth, these filters demand removing of the cartridges from the filter and then hose it off. Once it gets cleaned, it is ready to be installed and used back again for filtration.

To find the best quality hayward swimming pool filters at the most affordable rates, click the link.
Comments
avatar
Please sign in to add comment.