Ultimate Tips to troubleshoot Brother Printer Error Code 4f – Unable to Print

Brother Printer Error code 4F – Unable to Print is one of the most common inkjet printer errors. It is quite annoying when you really need to use your printing machine. This error code affects most of the Brother Inkjet printer range. This one is difficult to fix without any expert help, but printersupportsnumber is going to tell you many troubleshooting methods and hopefully, you will be able to solve this error by yourself with a small amount of effort.

Brother Printer Error code 4F: -  

Error code 4F - unable to print is a message related to the print head. It means your print head has either an electrical issue or that it has a temperature error. In this blog, there are a few things which you can try to fix the issue.

Causes of error code 4F: -

This error code may occur when we use the compatible or remanufactured inks. They blocked the printhead nozzles, and even as this could be the case if you have been using really cheap, low-quality inks. On the other hand, this error may also occur when the printing device says your ink cartridge needs replacing and you keep printing until the cartridge runs dryer. Because if there is no or little ink in the print head and the resisters begin to heat, they tend to overheat and burn out.

Fixing of Brother Printer Error 4F

Here are the best tips to resolve your printing machine problem:

Tip 1:

The first and best tip we can tell you is to check the warranty of your printing machine. If your printing machine is in warranty period. Then simply visit Brother Support and get them to fix your printer.

Tip 2:

Some models of Brother Printer have a removable and replaceable print head. Check your printer’s manual to confirm whether your printing machine has a removable or replaceable print head. If so, then the simple way to fix this error code is by replacing the existing printhead with a new one.

Tip 3:

Check the Foreign objects:

Sometimes any foreign objects such as dust, staples or paper can get stuck in the printing machine and cause issues. In such case unplug your device and check around the print head to see if there seems to be any foreign object there. If you find any objects, you can use an air duster to gently blow the objects out from the printing machine.

Tip 4:

Fixing temperature error:

If the resisters are overheating, it is possible that give time to cool it down and the error will be fixed. Follow these steps to fix temperature error:

1.       Remove all ink cartridges from the printing machine and properly clean the contacts on the printing device and cartridges.

2.       Unplug the power cable of your printer and leave it for 10 – 20 minutes.

3.       Plug the power cable back in and switch on the device, then wait for the message to insert new cartridges.

4.       Replace the ink cartridge if any of them is almost empty; install all inks back in the printer.

If you still get the error, connect with our team of experts. They provide you the reliable and affordable support for your printing device whenever you need to. You can call us on our Brother Printer Support toll-free number to seek help from our professionals. Feel free to talk to our specialists; they are available 24×7 to help you.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Nov 30th 2018 00:22. Viewed 631 times.

Share on APSense

Comments