Types Of Hems You Should Know About

To prevent the fabric from unraveling and to bring beauty, professionalism, and finishing to the garment it’s important to work on hem. A perfect hem created by the best sewing machine for beginners can make your garment durable and long-lasting.

You can choose any kind of stitch from the sewing machine based on the nature of your project. If you are a beginner then this is just the right place for you to know about types of hems.

Sew hem on a sewing machine

Hand-Rolled Hem:

If you are working with the sheer fabric then this kind of hem is suitable for the project. First, you need to add two basting stitches at the edge of the hem and till the outer stitch cuts the extra fabric. Roll the trimming end inwards and use slip stitches then.

Banded Hem:

If you want to add contrast or extra colors to the hem to your garment then add an extra piece of the band at the end of your garment and sew the right sides. In the end, you need to turn sewn edge inside and your banded hem will be ready.

Baby Hem:

This kind of hem type can be used for lightweight fabrics and can be rolled easily. Just below the hem allowance, stitch a line approximately 1/8” and then cut off all the extra fabric to the stitch line. Start folding the stitching line and again sew it. This can also be known as rolled hem but usually, this type is used when you are preparing some baby clothing.

Faced Hem:

If you have easy to use sewing machine then to prepare faced hem you can select zigzag or scallop stitches. In this hem, you have to add interfacing to keep the garment strong. Attach interfacing to the two ends and then sew them together. The right side of the fabric must be together and later you can turn the fabric out.

Sew faced hem

If you are still looking out for the right sewing machine for new users then read our guide of the best portable sewing machine for beginners and get the right one.

Fringed Hem:

If you want to add fringe to the garment, you should add a single zigzag stitch just above the hem edge. This will help your fabric in keeping away from fraying. In the end, there must be vertical threads remaining and use the ripper to remove all the extra threads. There must be no mark left on the fabric for finishing.

Turned Hem:

This is the simplest hem and you can use it anytime in any project. You just have to turn the hem allowance under the fabric and make sure that the wrong side of the fabric is joined with each other.

Lettuce Edge:

This hem will leave the wavy edge and it’s quite popular. You have to simply start doing zigzag stitching and pull the fabric. It will keep the fabric stretching from both sides.

Conclusion

In the end, don’t forget to do cover stitching. You can have some help by reading coverstitch machine reviews to get the right one on your sewing desk. Using the right coverstitch machine for stretchy fabrics will speed up your sewing projects and produce beautiful results.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on May 30th 2019 02:54. Viewed 616 times.

Share on APSense

Comments