Tuning Your Plumbing System for Home Improvement

Maintaining your plumbing system can help you save tons of money on big plumbing problems, Frequent tuning up of the bathrooms and kitchens will save your time and money in the long run.

The following measures have to be taken to maintain the entire plumbing system. You can check for most of the things yourself, or even call a plumber to do the same.

In Sydney, most commonly plumbers get called out for drains rather than sewer line replacement or water heater problems. Drains need to be cleaned from time to time as they tend to get clogged.

In bathrooms, drains get clogged due to hair, water sediments, soap scum and other debris while in the kitchen drains, the most common clogging agents is grease and oils.

1. Use a drain cleaner once every month.

2. Pour hot boiling water in the bathroom drains, to prevent their possible clogging; although it won’t work much with grease.

3. Use a drain cover or screen to prevent any hair from entering the drain.

Your water pipes should be insulated properly or else there are chances of their bursting in the winter season. Frozen pipes can cost you a lot of problem as well as money.

Thus, it is always recommended to have proper insulation or even electric heating for some pipes which have more chances of getting frozen. Preventive maintenance costs your much less than actual frozen pipes.

1. As the winter approaches, disconnect and drain your garden hose.

2. The indoor cut-off valve should be turned off.

 

Call your plumber for routine check-ups of your house plumbing system and perform some tuning up. The routine visits can be as frequent as once a year or even twice a year. It will save your time, money and many headaches in the long run.

Here are a few things that your plumber will look in your plumbing system. If you know, what these things are, you can keep an eye for them and call an expert, if anything gets out of hand.

• Checking for leaks and any kind of exposed pipes.

• Leak detection is done through your water meter, water puddles, dampness on the walls or water stains.

• Checking signs of any corrosion. Corrosion can cause dangerous leaks in your water pipes or gas pipes if not dealt early. A most common sign is discoloration of the pipes into a rusty color.

• Checking the water pressure. The water pressure should be normal; if it is low it can due to debris in the showerhead or faucets. This can be easily solved, but it the water pressure is continuously low, there can be a major problem with the water line.

• Testing the drains of the kitchen and bathroom. If slow draining is visible, there may be a clog or backup problem. Bubbles and gurgling sound coming from the sink while the water drains is also a bad sign.

• Checking the toilet and water chambers for any leaks, loose valves and proper working of the heater as well as the flush.

Thus, follow this guide for effective plumbing home improvement Sydney and save yourself from any hassles of the long run.

Report this Page