Troubleshooting Tips for Common Problems with Automatic Gates

Posted by Locksmith UES
1
Feb 2, 2013
576 Views
Image Electric motorized gates are considered as a symbol of luxury as well as security. Owners install electric fences and automated gates to get rid of chaos and burglars. No doubt, these kinds of gates have become a craze and way too successful because of its high-tech functions and features. At Rolling Gate NYC you can customize it as per your need and choice in terms of scale, style (sliding, rolling or counter-weight), material (wood, iron, steel, zinc or aluminum), cornice, frame, size and finishing.

As it is said “nothing is static everything is falling apart”; problems may occur to your expensive and high on features automatic gate too. Such as poor earth grounding, faulty cabling, jammed gate locks or failure of access control sensors or etc. The problem gets severe when the company that originally installed the automatic gates and other add-ons does not come to resolve your problem. In that case instead of biting your nails check the source of the problem and later possibly fix the issue or just call Rolling Gate Repair NYC.

                           
Here is the guide:

•    Check the power supply to your automated system. Observe the external equipments such as intercom or touch keypad and make sure there is a proper power supply to the devices then check for the sound or beep correspondent to the touch on keypad buttons. This gives you an indication whether it is a power issue or there is a problem with the peripheral equipment.

•    To access your gate activation, check the transmitter. The light on the transmitter illustrate that it is working. If not then check the battery it might be flat.

•    Gate stuck is a very common problem with sliding and rolling gates. In that case wave your hand in front of the photocells and there will be a clicking sound in the background. If you cannot hear the beep or click sound then there is a problem with safety beam or photocell system. To check- remove the cover of photocell and see if the beam is clear. If you find the beam system unobstructed but not functioning, call a Rolling Gate Repair NYC specialist.

•    Another reason behind gate stuck is the problem with functioning of motors of the gate. For this check the hardware trigger inputs and see if the motor is able to handle the weight of the gate.

We hope that this article from Rolling Gate NYC- a 24/7 emergency maintenance and repairs service, have helped you.

1 people like it
avatar
Comments (2)
avatar
Michel Kenn
9

Digital Marketing

avatar
Rose Frankie
16

Internet eBusiness,

avatar
Please sign in to add comment.