Tools Needed for Cable Railing Installation

Every successful cable railing installation project starts with having quality cable railing tools such as Cutter Wire, Cable cutter. Whether you have decided to do the installation on your own or intend to hire a professional for the project, only approved stainless steel cable cutters and wires should be utilized for cable railings, wire rope assemblies, and stainless cable fencing projects only.

If you are planning to install your cable railing, the following is a skeleton guide you can use. Since each project is different, you need to understand the best solution for your project. If you don't have cable railing experience, then no problem. This blog is a run-through to help you navigate the planning process and the essentials, even if you have no prior knowledge of cable rail.

What is Cable Railing?

Stainless steel cable railing offers an exciting alternative to traditional wood stair and deck railing, instead harnessing the sleek design of stainless steel cable tensioned between metal or wood posts. Depending on the configuration, cable railing complements a variety of styles, including, modern, industrial, classic, or craftsman.

Always simple and elegant, these are popular for both the interior and exterior. Plus, these stainless steel cables along with properly treated posts and handrails, offer corrosion resistance and durability. You can find these cable railings in homes as well as commercial spaces. Its luxurious appeal and corrosion resistance make it ideal for high-end modern space. Moreover, depending on the scale of the project, cable railing systems can be quite affordable.

With this in mind, you must consider structural requirements, material options, cost, tools required, building code compliances, and more to ensure a smooth installation. To avoid problems and get the most out of your cable railing project, it is important to understand those elements.

Most manufacturers provide some form of installation instructions for their cable rail system. So if you plan to install the system yourself, it is important to look at the resources and determine if you are comfortable with the process. Some cable railing systems are easier to install than others!

Before you invest in the tool to install them, there are somethings to note:

Know About the Materials: Cable, Posts & Components

It's time to get a quote for the necessary material before purchasing, once you have a good idea of what you need. A cable railing system primarily consists of cable wire, railing posts, and cable components. Here's what you need to know:

Railing cable: All cables are formed by twisting together thin pieces of wire strands. Whether you opt for a cutter for wire or crimpers, you need to consider:

1. The number of wire strands used

2. The thickness of each wire used

3. The twisting style

Cable railings are only safe if installed right with the best materials. To determine the maximum cable you'll need, multiply the length of the run by the number of cable runs needs and some extra for allowance.

Railing Posts: These serve as the anchors for railing cables. There are two main materials to choose from- metal and wood. The two popular metal options are aluminum and stainless steel. It is important to consider the strength and style when choosing railing posts. Fortunately, stainless steel stands the test of time and also comes in a range of styles to suit your needs and preferences.

Additionally, be sure to consider mounting surfaces which can be level, angled, or vertical.

Cable Components: These tensioning materials are used to keep the cable railing tight. These components come in an array of shapes, styles, and sizes. Be sure to choose the right components based on your cables, posts, and style preferences. You can always get in touch with a leading manufacturer who insists on providing high-quality products with economical prices and professional service.

Common Tools for Installation

When installing cable rails, you may need to purchase a few special tools to install cable rails. It is essential to check with the manufacturer to see which tools are required for their system. For instance, whether you are installing an exterior or internal stainless steel cable rail, you might require some tools and supplies to ensure a proper, successful installation like Cable Cutters, crimping tools, drill, insert tool, post mounting screw, and much more.

Here are the tools you need for the successful completion of your project:

1. Cable rail insert tool: This tool is handy to insert a threaded rail when an Allen wrench rotates the tension receiver. This tool even gives the users with a special slot that allows it to fit over the cable and can be tightened with a standard wrench or locking pliers.

2. Stainless steel polish: A thick, easy-to-apply metal polish is all you need to remove oxidation and light on-the-surface rust from stainless steel. As a little maintenance is needed if you are using it outdoors, especially in coastal areas.

3. Post mounting screws: These are important to make your installation easy. Designed for interior and exterior installations into solid framing materials.

4. Handrail mounting screw: These screws are used to install cable rails which are tested to fasten wood or steel handrails to cable rail posts.

5. Cable crimpers: We recommend going with a hydraulic crimping tool because they make it easy to connect the cable to the attachment stud. This custom-designed tool is made with high-quality materials for super durability, strength, and long-lasting performance. With an upgraded hydraulic crimper tool, it is easier than ever to bid adieu to frayed cable ends and unwanted pieces. It's time to switch to a cable railing crimping tool and save your time on a project.

6. Cable cutter wire: A high-quality, heavy-duty cable cutter will make it easier to get a clean cut every time, making it easier to apply your fittings. These hand-held pair of cable cutters are suitable for most installations or upgrade to a bench-mount option for large commercial projects, or repeat installations over multiple projects. Without worrying about inflicting any type of damage to the cable, you can rely on our carefully made cutters to cut cables. When trying to understand the best pick out of the stainless steel cable cutters you need to take care of the smaller gauges while some can handle larger, while others handle everything else in between.

7. Stainless steel cable railings: No cable railing installation could take place without the actual cable rail! If you choose a reliable manufacturer, you can be sure to get high-grade stainless steel, the type used to support any environment as well as architectural applications even near the ocean. No matter the type you choose, make sure the cable is strong and meets local building codes.

8. Cable rail drill guide kit: This kit is everything you need for a successful installation, These come with upgraded fits and are available at different angles for precision fit and drilling holes with unconventional angles and standard angles.

Conclusion

Different cable railing projects require different tools. Some companies sell these tools in kits while some sell them separately, whether you need a crimper or a cutter wire you can get everything you need for a particular project all at once.

Now that you have decided on the tools, it's time to put your plan for installing your cable railing system into action. This can be done with the help of a sketch to visualize the project. Start by listing the measurements of your deck or other structure to visualize the project, additionally, enlisting all the materials, tools, and any other requirements on the same. Then get started on your new cable railing.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jan 13th 2023 03:37. Viewed 85 times.

Share on APSense

Comments