To Protect The Inverter Battery From Damage, Then Clean It Like This

by All India Event seo

If you also want to clean the inverter battery then you can follow these tips.

If there is a sudden power failure in the middle of the summer season, it is as if some great calamity has occurred. Perhaps everyone would like to avoid such trouble. When there is a power failure in the middle of the night, first of all the attention goes towards the inverter. If the inverter battery is good then it is not a problem, if it is bad then it becomes difficult to escape the heat.

In such a situation, if the battery is properly maintained and cleaned, then the battery lasts easily for many hours. If you are having trouble cleaning the inverter battery then you should definitely read this article. Because in this article we are going to tell you some tips by following which you can easily clean the inverter battery.

Do This First

Inverter batteries are easy to clean, but can be dangerous at times. Therefore, before cleaning the inverter battery, you need to pay attention to some things. For this, first you need to turn off the battery power or turn off the connection. After turning off the power, make sure to inform other members of the household about it. After detaching the connection from the battery, put the battery in another location.

Use Baking Soda

You must have used baking soda not once but many times in cooking or cleaning the house. In such a situation, you can easily clean the inverter battery with the use of baking soda. Before cleaning the battery, you must apply gloves and face mask. Because acid is used in the battery which can put you in trouble. That's why wear both of these things. Follow these steps to clean with baking soda-

· First of all, mix 1-2 teaspoons of baking soda in two cups of water and mix it well.

· After this fill this mixture in a spray bottle.

· Now spray this spray on all the parts of the battery and leave it for some time.

· After about 5 minutes, wipe it off with the help of an old brush or scrub and keep it under the fan for some time.

Clean The Terminal

Before cleaning the terminal, let us tell you that the place where the power wire is connected to the battery is called the battery terminal. (How To Clean Inverter Battery Terminal) Sometimes corrosion occurs in and around the terminal, due to which the battery can also get damaged. Sometimes the flow of current can also be reduced due to corrosion in the terminal. In such a situation, from time to time, clean the battery terminal by turning off the power. For this, you can clean it with an old brush. You can use baking soda to clean the terminal.

Make Use Of

You can also clean the inverter battery properly by using vinegar. With its use, the most stubborn stains on the battery can be easily removed. For this follow these steps-

· First of all, mix 1-2 teaspoons of vinegar in two cups of lukewarm water and mix it well.

· Now dip the brush in this mixture and rub it well on the battery.

· After cleaning with vinegar, wipe it well with a fresh cloth and leave it for some time.

Keep These Things In Mind

· After cleaning the battery, be sure to keep it out of the sun for about 30-40 minutes. (How To Maintain Inverter Battery) When you feel that there is no moisture in the battery, then only you can connect it with electricity.

· Do not keep the inverter battery on the ground, on a wooden, stone or table, as exposure to moisture can damage the battery.

· Before cleaning the battery or turning on the power, be sure to wear slippers on your feet and gloves on your hands.

· Also do not keep the inverter battery against the wall.