Tips to Repair Your Fascia Board - ALTA Roofing and Waterproofing

A building structure is made up of several components and parts. Each part pays an integral role in the functioning of the building. When it comes to roofs, the scenario is the same. A roof consists of different parts, the proper functioning of which is integral for roofs function. When it comes to roofs, they are often neglected as they are thought to be immortal and forever. This approach is common for every building owner, this is because all types of roofs have generally a quite long lifespan, which makes them very rigid and strong structures. Roofs can face decline due to damage of any roofing component. As roofs are made up of many important components, it is important to consider the wellbeing of every component of the roof. One of such components is a fascia board. A fascia board is highly important for the roof’s functioning, as they are attached to gutters. A fascia board is a part of the roof made up of wood and it is located on the exterior rim and attached to the gutter. A fascia board must always be in condition, as in addition to the roof function the outlook of the building will also become promised in case of poor fascia board. Therefore in order to maintain a good health of fascia board always consult a good roofing company in queens ny in case of any slight inconvenience displayed by  fascia board. To ease out things for the building owners we have displayed some ips which the building owners can take themselves to repair the fascia board.

The location of the fascia board matters the most. It is important to consider the placement of the fascia board before installing it. This is because a poor location can destroy the fascia board. Never nail the fascia board near the end of the grain surface. As this will cause cracks in fascia boards, which will not only look bad but will also allow water to get in.

The quality of the nails with which fascia board is clipped is highly important. A low quality nail would cause troubles just after a day of installing fascia boards. So make sure to get stainless nails or hot-galvanized nails. As these nails are not too expensive as well and much better in clipping the fascia board to the roof. 

Painting the fascia board especially at edges will not only make it look highly aesthetically pleasing but will also ensure safety from harsh environments. As the edges of the fascia board are exposed to the outdoor environment they can get rotten in no time. Especially when made to come in contact with water these edges will develop rot even the next. So painting the fascia board will not only look good but will also save the fascia board from water and other conditions. Moreover the overall appeal of the house will also increase by a good painted fascia board. Another thing you can do is to keep the edges in a primer paint for a longer time, as a more thickened layer of paint would prove to be much more protective for fascia board edges.

Report this Page