Tips for Cleaning the Interiors of a Mobile Concrete Mixer

by Jackie P. ProAll International Manufacturing Inc.

Concrete is an essential material for construction. It's prepared at construction sites for several applications. It has the strength, durability, and versatility to complete various construction projects. However, concrete is nothing without a mobile concrete mixer. A mobile concert mixer can help construction workers prepare concrete whenever and wherever they want. So, if you are planning to buy a mobile concrete mixer, you need to know how to keep it clean and ready for your next use.

A mobile concrete mixer is a concrete production machine used for on-demand concrete production. A mobile concrete mixer can move easily from one place to another. It is essentially a mobile batch plant mounted on a chassis that carries construction materials like sand, cement, and water to the site. This type of concrete mixer can ideally produce any amount of concrete, at least about 400 yards or more per day. It is possible to pour at the site when the unit is re-loaded with all materials at the construction site. The blending of materials is a continuous operation of a mixer, and the operator has to operate the start and end mixing anytime. This helps in proper management and meets all demands of the construction site. In spite of the job, it does, many times we forget to value a concrete mixer.

 

Why Clean a Concrete Mixer?

 

Many times, concrete does not exceed expectations and performs the way we want. All we need to do is give attention to their well-being and cleanliness to get the most out of them. We will talk about the best process to clean a mobile concrete mixer to retain the quality of the construction projects. As you know, a volumetric concrete mixer can eliminate the need to go to the batch plant to alter applications and complete on-demand jobs on time. It is also easy to clean them when the job ends.

With the help of the right chemicals and tools, it is easy to clean them and maintain their appearance. Ensure that after every delivery you clean your portable concrete mixer properly. To get started with the cleaning process, you need to turn on your mixer to start it spinning with water and gravel mixture to knock down the hardened concrete. If you do not know how to clean your portable mixer, you can always refer to the user manual.

When mobile concrete mixers carry concrete, the concrete accumulates in lumps, and the steel is prone to corrosion. Cleaning of concrete-on-concrete tanks and access mouths is essential to maintain your truck. Ensure that after every delivery you clean your truck properly. It is better to clean cement when it is wet. That helps clean fast as it does not have complex chemicals to break down. Rather than using hydrochloric acid, you can use mild substances or chemicals to clean the mixer. A high-powered rinse and a scrub are sufficient to clean the wet concrete from the mixer.

 

 

Use Tools and Chemicals.

 

When your concrete drum starts to spin, you can use a hammer or mallet to loosen any of the hardened concrete. After that, spin the drum for a few more minutes, and then take off the concrete to empty it. Once you have emptied all of the things, use a high-powered spray to rinse the interiors of the drum. This will knock large chunks off the walls of the drum easily. But make sure to wear safety goggles to protect yourself from dust and debris. You have to devote time to cleaning because it cannot be cleaned all at once. You can remove concrete from the drum by spinning the drum twice or thrice.

Another inexpensive way to clean the mixer is with water and gravel. It does not include the use of corrosive chemicals. You can just leave a mixture of water and gravel rotating for fifteen to twenty minutes for the best result. By adjusting all the nooks and crannies of the drum, you can get the desired results. If you do not know how much gravel and water to add when using the mixer for the first time, you can look for the user manual guide by the concrete mixer company and clean mixer.

You may need rubber gloves, a mask, safety goggles, and a cleaning solution for the cleaning session. When slowly spinning the mixture, you can tilt it in several directions, it will completely clean the drum. Once you have completed the process, dispose of the liquid and rinse your drum completely with water to allow it to dry up.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Oct 19th 2022 07:17. Viewed 174 times.

Comments