Tip for DIY Cool Room Repairs and Servicing

For an entrepreneur, the biggest nightmare is pulling up the shutters and realizing that the most important, commercial cool room or refrigerator is not working. In this situation, there is nothing much to do, as the store has been thrown open and soon, guests would come pouring in. To avoid this situation from turning into a reality, it is important that you keep in mind that this machine, despite being really mammoth, is very fragile. Therefore, it requires timely maintenance and servicing as any laziness shown in these two things can lead to business shut down for at least three days.

The good thing is that the servicing or maintenance can be done through DIY, but it is the last thing that you should attempt. The reason why this suggestion is given is that there are several important and technical facts that can go over your head. In this situation, just to save some money, you should not attempt DIY because any major fault would increase maintenance expenses by 5-10 times easily. Listed below are some important things that you should consider before attempting DIY cool room repairs or cool room servicing.

Diagnosing the problem

In the initial part of the cool room servicing process, you need to determine the fault prevailing in the present cool rooms for sale. You need to determine whether –

• The unit not keeping food cold?
  
• The inside of the unit not feel as cold as before?
  
• The refrigerant is leaking out of the unit?
  
• The coils frosted or iced up?
  
• The thermostat is not reading correctly?
  

Evaluate the challenge

In the second step of the process, you should first have to understand that there are different levels of the process of maintenance. Therefore, before you start attempting DIY in this, it is crucial for you to assess the level of difficulty so that repair work can be done accordingly.

For example –

• Easy fixes involve replacing shelving, light bulbs, knobs and water filters.
  
• Intermediate repairs include door closers, latches, hinges, gaskets and fans.
  
• The challenging repairs are related to compressors, motors, condensers, and evaporator coils.
  

With this knowledge, it would become easy to make an estimate whether DIY is a practical thing to apply or not. Moreover, you need to ask yourself, the following questions.

• Do I have enough information about the unit?
  
• Do I have the right tools present in my toolkit?
  
• Do I need to repair or replace a part?
  
• How easy or difficult will it be to install that part?
  

Consider the cost of DIY

Of course, by getting DIY cool room repairs, you can save a good amount of money, but on the other hand, any mistake in the process can increase the expense multiple times. This aspect has to be taken into consideration as you decide between DIY and calling the experts for cool room servicing. The science is simple that if the problem is appearing bigger, you need to call in the experts to take care of it.

Steps to follow while proceeding with Caution

• First, unplug the unit to reduce the potential for injury
  
• Next, review the owner’s manual for troubleshooting information
  
• Most manufacturers have service and support resources on their websites