Things to Keep in Mind While doing Siding Renovation in Vancouver

Are you looking to get exterior siding installation done at your place? Whether you choose one of the siding contractors in Vancouver BC for the job or do it yourself, it is necessary that you set the fundamentals right. To go easy with siding installation, here are some proven tips by top exterior siding contractors Vancouver BC that can help you achieve the desired results.

So, let’s start.

Mice, bees and all sorts of other critters love residing inside vinyl corner posts. Make these pests stay away by capping each post before you go with siding renovation Vancouver. Begin by cutting off a few inches of the J-channel portion on the post. Fold back the left-over flaps and firmly tap a crease into them with your hammer.

Nick the flaps so the post will fit snug up against the wall. These posts tend to crack if they’re not warm, so if it’s cold on the external side, lay them in the sun or bring them into the house before you do this.

There’s no option to stop rainwater from getting into the J-channel that lies on the top of windows and doors. But you can prevent that water from getting behind the side J-channels. By creating a flap in the top J-channel that overlays the side channels.

Compelling through vinyl siding with a wood blade in your spherical saw will make the siding to shatter, which is both annoying and unsafe. Get a blade made to tear vinyl siding. They’re inexpensive and available at any home center. If you’re using a sliding miter saw, and the siding is still fragmenting, try slowly stretching the saw backward through the siding.

Make the use of 2-in. galvanized roofing nails for your vinyl siding until the casing has foam on it. Then you’ll wish for longer ones. Don’t fix the nails tight: Each panel should be able to move back and forth or the siding will fizz during high temperatures. Treat every stud: Expansion and contraction of the siding tend to lose its nails that are secured only to the sheathing.

Report this Page