Things to consider when selecting vapour blasting

Vapour blasting is a cleaning technique used in America. Vapour abrasive blasting equipment helps you to clean surfaces and objects quickly and thoroughly. Vapour blasting is also known as wet blasting, Vapor honing, dustless blasting, or simply vapor blasting. Abrasive Vapor blasting is suitable for domestic or industrial cleaning.

Whatever the name you choose to use, this process refers to using a combination of water, abrasive particles, and compressed air to clean an object or surface. A vapour blasting Sydney is an effective way to clean quickly and thoroughly without producing an excessive amount of debris. Wet and vapor abrasive blasting offers significant advantages over dry abrasive blasting, but selecting the best equipment for your needs requires an understanding of five important factors. Let's discuss them below in this article.

1: Water usage

Water is important to encapsulate and reduce the dust generated by the abrasive process. Minimizing the amount used conserves resources facilitates containment of the expended water and media, and makes post-job clean-up easier. Therefore you want a machine that uses as little water as possible for effective dust suppression. When making a purchase decision look at the specs of the equipment to determine how much water is used.

2: Media consumption

The maximum abrasive media consumption rate does not always provide the best production rates and blasting efficiency. So, a high media consumption rate increases both the media cost and the clean-up cost. Manufacturers of plastic equipment often provide performance information to help select the right combination. Pressure is determined by the water pump and media flow control valve.

3: Ease of use and maintenance required

Go for a machine that is easy to set up and control, with rinse always available. Features such as fixed pot pressure remove the need to adjust in the field, making the machine easier to operate by providing more consistent blast pressure. Invest in a machine that is robust enough to need little maintenance, but consider what will happen when maintenance is required. Does it have a nearby supplier to work with in case a machine needs to be repaired?

4: Avoid sandblasting

Sandblasting and abrasive blasting are sometimes used interchangeably. But many companies are moving away from sending as a blasting medium for some reason. Sand contains silica, which is known to cause serious respiratory illness for workers involved in the sandblasting process. Send contains high moisture content that can lead to the premature demise of blasting equipment.

The manufacturer should be able to provide reputable third-party test lab reports that validate their claims with specific measurements of airborne particles concentration using a variety of media.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Dec 11th 2021 09:12. Viewed 181 times.

Share on APSense

Comments