Tank Girth Welder: Sturdy And Ergonomically Designed

Girth Welders being the ideal solution for tank fabrication applications, tank girth welder is applicable for bottom-up or jack-up constructed single or double wall storage tanks inside and outside welding. The self-propelled welding system can reduce field storage tank welding time up to 40%. Weld defects are greatly reduced saving tank erection costs.

The girth welder is known for the horizontal welds up to 20 times faster than standard manual techniques. The tank automatic girth welder is driven by motors, controlled by the PLC, assisted controlled by electrical relay and hydraulic press structure, thus, it can realize automatic welding. Designed specifically for cylinder, storage tank, pressure vessel and solar water heater, etc, but there are various industries in the sector where the demand for tank girth is much higher than the other machines.

Welding power is supplied through welding cable to the welding head and it cuts storage tank welding time up to 40%. Handles plates 6 ft to 10 ft high and thickness being 2", the welding system power source is kept on the ground. The machine include a dual-motor, frequency-inverter drive system, the tool is also availed with power source storage and a heavy-duty flux recovery system.

Welding is used in the various industries as it enhances the productivity for welding of oil storage tanks, liners for reactor building of nuclear power stations. Tank girth welder is completely equipped with welding heads, all controls, flux support belts and flux recovery units. It is a system designed for tank fabrication applications. You can find both single and double sided operation available for this welding tank. The operator platform is sturdy and the all-weather curtains for operator safety and comfort.

As automatic girth welder is sturdy and ergonomically designed, it is fully equipped with its own direction and speed controls. Welding current and welding speed can be set on the operation panel as it has high automation level. Unlike current girth welders on the market, the tank welder comes in standard system. It is also suitable for rules of girth seam, straight seam and various custom-shaped seam-welding by TIG, MIG/MAG, Laser, Plasma and other welding process.

The tank girth welder machine is driven by motors, controlled by the PLC and controlled by electrical relay and hydraulic press structure. The welding defects are greatly reduced saving tank erection costs by this device. This is applicable for bottom-up or jack-up constructed single or double wall storage tanks inside and outside welding. The welder is applicable for bottom-up or jack-up constructed single or double wall storage tanks inside and outside welding.

Fitted with high-performance nozzles, the fan fitted with the Tank Girth Welder works effectively to support the equipments’ gear motors. Since, it is a machine which is designed keeping in mind the traditional audience, therefore, it can also be called as a practical machine. With a heating power that can be continuously adjusted from 68 to 1292 °F, it can meet the requirements of various materials.