Some Steps Involved In The Process Of Shower Regrouting

by Andrew Lope Business promotion

It is basically the tiles that transform the looks of a bathroom area and make is look grander, more spacious and attractive. These tiles are supported by grout, but the problem with both these things is that because of close contact with water and other elements like moisture, soap, etc., they become dirty. When this happens around the shower area, not only that area starts looking dirty, but at the same time, it becomes vulnerable to damages and water leakage as well. Therefore, timely shower waterproofing regrouting services from the experts become mandatory to that mainly involves removing the old grout to apply the new one and transform the looks of the area. Here in this article, we take a look at the steps that shower regrouting experts would take to remove the old grout and replace it with a new one.

Step – 1

Removing Old Grout

In the first step of their task, the experts will set the area free from old and worn out caulk and grout and for this, they will use a plain old razor blade scraper tool.

In some cases, where grout and caulk is too hard to remove, they will acetone as it is known to soften these things like grout and caulk.

According to them, the shower grout is dug at least 1/8^th on an inch deep to make sure that the entire grout is removed in just one stroke of the grout removal blade.

This step will set the entire shower area free from old grout, but at the same time, it is recommended not to apply new grout straight over the area.

This when done, is given the name of skim coating grout and this is a very bad practice according to shower regrouting experts. The reason cited by the experts is that doing this will not let the new grout to stick to the area properly and as a result, in some days time, it will start flaking or chipping away.

Step – 2

The Drying Process

Once the grout has been removed satisfactorily, the next step involves letting the area dry totally to ensure that new grout would stick properly. This means that once the grout has been removed, you’ll have to leave the area totally unused for some days. Some experts even recommend using a table fan to let the area dry completely so the upcoming grout can set in the area without any problem.

This drying of the area around the shower is recommended for one more reason, i.e. giving sufficient time so the mould, etc. could dry and die.

Step – 3

Grout Application

In their shower regrouting services, these shower regrouting experts will use only dry, powdered cement based grout for your new grout. In the beginning, they will mix the grout to a peanut butter consistency and then, follow manufacturer’s instructions related to shower regrouting. The consistency of the grout is something that they stay very particular about because watery grout will not set properly and will be weak, soft grout that will not last for a long period of time.

As a part of the process of shower regrouting, they will force the grout deep into all of the grout lines to ensure that there is good coverage of grout in all of the grout lines.