Screw Conveyors and Its Types: Fully Explained

by Sanjeev Yadav SEO Consultant

The most frequently employed type of screw conveyor from a screw conveyors supplier in India is horizontal screw transporters. Horizontal screw conveyors are offered in a broad variety of sizes, lengths, specifications, and construction equipment to move bulk materials from one section of the process to another.

Screw conveyors are generally intended to transmit mass materials at a trough load of 15, 30, or 45 percent, based on the material properties of the particular bulk material. As a rule, thin, free-flowing, and non-abrasive bulk materials can be used with a 45% trough loading. Usually, denser, lenient, and more abrasive bulk materials are used in drying loads of 15 and 30 percent.

The suggested position for the drive unit is at the end of a vibrating conveyor that pulls the bulk material to the end of the drive. This structure allows the tension of each screw part as the bulk material is moved into a screw transducer\'s discharge, which decreases wear and tiredness on the transporter components.

Advantages:

Ideal for transporting dry to semi-fluid bulk materials – free to slow down
cost-effective relative to other belts, pneumatic, or aeromechanical conveying systems
Distributes bulk material effectively through several inlets and release points to different locations
Enclosed absolutely in a dirty, corrosive, or unhealthy condition

Inclined Screw Conveyors:
Marginally above the horizontal position inclined screw conveyors from screw conveyors supplier in Telangana normally run at 45 degrees from the horizontal position. The tilted screw conveyor is a vertical screw conveyer above 45 degrees and has to be built in compliance with the Vertical Screw Conveyor Engineering Guide. As the degree of incline increases, transport efficiency decreases, and the demand for horsepower increases due to the influence of gravity and bulk materials.

Shaftless Screw Conveyors:
Cenritfuges, filtres, or mixers can easily convey bulk materials discharged from a shaftless screw conveyor. Our shaftless architecture offers a non-obstructive transport surface that enables fast transport of materials. The Shaftless Screw Conveyor is the ideal solution for handling high-humidity bulk materials.

Advantages:
Ideal for handling sticky and sluggish bulk materials
Improved conveying efficiency when compared to other types of conveyors
With a number of configurations available, it offers a good amount of flexibility
Internal bearings are eliminated

Shaftless Screw Conveyors from screw conveyors supplier in Hyderabad are used for the transport of almost everything, from catalysts and dewatered biosolids in the chemical, food, mining operations, and wastewater industry.

Vertical Screw Conveyors:
The highly reliable way for raising a range of bulk materials at very steep or fully vertical inclines is vertical splash conveyors. You can see every spring conveyor situated on a 45-degree incline as a vertical spring conveyor.

The compact design enables the vertical screw conveyor to be fitted into virtually every plant design. The vertical screw conveyor is an economic and reliable portion of any method of bulk material handling with a minimal number of machine components.

Advantages:
Great for dry and semi-fluid handling of materials.
Up to 6,000 cubic feet of space per hour.
Capacity to lift bulk materials up to 30 feet without using internal covers.
Closed cycle dust and vapor-resistant construction.

Shaftless screw conveyors from a screw conveyors supplier in India are effectively used for the transport of all goods ranging from catalysts to dewatered biosolids in the chemical, food, mining operations, and sewage industries.