RO Membrane Antiscalantsby Mitesh Patel Water Treatment Chemicals Manufacturer
RO Membrane Antiscalants
Eliminate scale and reduce fouling in your membrane systems:
RO systems create salt concentrated water streams that could produce scale or fouling. ZEELCHEM 9003 RO membrane antiscalants are pre-treatment programs designed to eliminate scale and reduce fouling in membranes systems, regardless of the feed water source.
While treatment with an ordinary antiscalants does provide some improvement, the use of ZEELCHEM 9003 patented chemistry maximizes efficacy against a broad range of scale-forming substances and keeps fouling material in suspension.
ZEELCHEM 9003 Antiscalants/Antifoulants:
The ZEELCHEM 9003 pre-treatment program is designed to significantly reduce scale formation and fouling in membrane systems. The antiscalants are suitable and effectively used in a range of feed water sources, including brackish, waste and seawater.
The use of ZEELCHEM 9003 chemistries improves efficacy against a broad range of scale-forming substances and keeps fouling material in suspension. Common foulants and scalants include calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, calcium fluoride, iron, colloidal material, silica and other organic contaminants.
Antiscalants/Antifoulants Features & Benefits
- Effectively control scales including silica, calcium carbonate, calcium sulfate, barium sulfate, and strontium sulfate
- Compatible with the leading reverse osmosis (RO) and Nano filtration (NF) membranes
- Maintain cleaner membrane surfaces by dispersing particulate foulants
- RO systems can be run at higher recovery rates, which translates to lower operating costs
- Products available with multiple global regulatory approvals
- Non-Phosphorus products available
- Effective over a wide pH range
What is an Antiscalant?
An antiscalant is a pre-treatment that gets injected into the feed water that flows through the RO membrane, preventing the membrane from scaling. RO membrane scaling occurs when particles accumulate on a membrane, causing the membrane’s pores to plug.
Some common membrane foulants and Scalants include calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, calcium fluoride, iron, colloidal material, silica and other organic contaminants.
ZEELCHEM 9003 suggests adding a RO membrane antiscalant to your pre-treatment program to improve efficacy again the broad range of scale-forming substances and to keep fouling material in suspension.
Typical Antiscalant Dosing
The typical antiscalant dosing range is between 0.5 and 4 mg/L.
antiscalant chemistry, antiscalant for reverse osmosis, antiscalant for reverse osmosis systems, antiscalant for ro, antiscalant ro membrane, antiscalant system, does reverse osmosis remove chemicals from
water, high ph ro antiscalant, reverse osmosis, reverse osmosis antiscalant, reverse osmosis antiscalant chemicals, reverse osmosis chemicals, reverse osmosis membrane antiscalant, reverse osmosis membrane cleaning chemicals, ro antiscalant, ro antiscalant chemical, ro antiscalant chemicals in india, ro antiscalant manufacturers, ro antiscalant manufacturers in india, ro antiscalant supplier, ro chemicals
- Guest Post Service
Permanent Link | Do-Follow Backlinks | Costs as low as $0.5
- Ad Space Available - Rent it Now!
Created on Nov 29th 2019 05:58. Viewed 191 times.