Precautionary & Safety Measures that Electrical Engineers Adopt

Working on heavy electrical jobs is always risky. When you are working around high voltage wires and transformers, you have to be extra careful about your surroundings. Apart from electrical hazards, there are other physical hazards also. The workers had to place electrical installations at a great height, and they are at constant risk of falling. Electrical engineering services in Sydney are doing a great job ensuring the workplace safety of workers. If proper protection protocols are in place, chances of mishaps will be decreased nearly to 0.

Let see the protection and safety measures that Electrical Engineers should keep in mind while working:

1. Avoiding anything in contact with water or moisture: This is the first and a very vital step that engineers have to keep in mind. Never approach the electrical circuits with wet hands or wet gloves. Water increases the conductivity of a medium, so when you touch a wire with wet hands, a high amount of current will pass through you, resulting in fatal injury.
2. Avoiding wires with damaged insulations: Never use a wire with damaged insulation. It may create a short circuit and result in a massive fire. For that matter, never use frayed cables too.
3. Using circuit breakers and isolators: While installing any heavy electrical equipment, make sure you have isolated that part from the primary circuit by the isolator and all the circuit breakers are down.Also, make sure you drain the capacitors before replacing them.
4. Strictly avoiding metallic straps and instruments:  Do not wear wristwatches or any metallic wristwear while working. Also, prevent metallic scales and pointers. Instead, use wooden rulers and pencils while working.
5. Using gloves, goggles, and boots: It is essential to protect your body from potential physical hazards. Use gloves and goggles to reduce the chances of harm occurring to your hand and eyes, respectively. Wear boots to keep your foot safe from small bits of wires and other parts that might injure your feet. Do not wear loose garments while working.
6. Always taking precautionary steps using a tester: In many cases, the circuits store electrical energy even after they are disconnected. Use a tester to check if there is any residual charge. This is a significant measure for electrical engineers working in industry or power stations.
7. Checking the ground fault circuit daily: Grounding is an essential part of the whole working station. It ensures that the surge current passes through it to the ground. If the ground circuit is faulty, it is suggested to get it repaired as soon as possible.
8. Keeping fire extinguishers handy: always keep fire extinguishers at different access points in the work station. This will help in stopping fires in case of fire emergencies.
9. Avoid storing inflammable liquids nearby the station:  Do not store any inflammable objects near the workstation.
10. Using rated wire and equipment: Always use rated equipment to avoid any future breakdown.

These are the rules all electrical engineers in Sydney should keep in mind while working. These standard rules ensure that both workers and engineers operate under safe and sound conditions. Most engineering firms in developing nations use this set of rules while working on big-budget electrical projects.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jul 22nd 2021 01:51. Viewed 172 times.

Share on APSense

Comments