Power Outages: Reasons and Solutions

Power loss causes huge damages to data and computer, in industry, data center and communication facilities, which are well designed for offering uninterrupted power. Power failures in sophisticated areas, albeit connected with grid fault in thestormy and harsh season, happen basically because of transformer failures, standby generator starting issues, wire faults, and other victims of bad maintenance which can’t be avoided.

Extra summer heat overloads current supply because of thehuge increase in air conditioning, causing power intrusions because of tripping of overload switches or load shedding.

Basically, during dry weather, contamination which adds electrically conductive components is gathered on power line insulators. First, storms and rains close the electric way causing arcs and shorts, tripping line breaker. Often utility lines catch fire because of power arcs.

In some areas, salt is utilised as part of winter road treatment, growing the amount of contamination increased by road vehicles kicking up salt from the road. This forms more possibility for power arcs near major road and freeways.

Trees are also a major reason for power failures in winter. Snow and the wind cause trees to fall. These falling trees cut power connections. Some power connections create power shorts and arcs between nearby power lines or from power connections to ground.

Till late 80’s, year by year, the first summer power outages or autumn storm’s arrival was accompanied by damage to faulty UPS systems and specifically worn out the backup batteries. No UPS manufacturer had ample staff, or ample batteries to manage with all angry calls from clients. The chaos stopped while microprocessor based UPS control was launched in early 90’s, allowing automatic examination of UPS systems with the inclusion of batteries, by functioning periodic power cut simulation practices. The practicing allowed detection of faulty systems, correction of the UPS and faulty and weak batteries’ replacement. All these preventive functions were done while mains power was still accessible, before the stormy climatic condition.

Latest research shows that installation equipped with UPS systems, don’t basically fail. In many cases, the power breakdown happened after UPS batteries’ depletion.

Similarly to the detailed first encounter with UPS systems, many researched power devices, which failed amid harsh seasons was unveiled of being already faulty.

These days, there are many leading UPS manufacturers who provide the best uninterruptible power supplies in a cost-effective way. Microtek is an example of them. Always remember to opt for a reputable UPS brand instead of opting for a local brand.