Only a few owners will attach importance to the ignition of the ignition system status

by Ctool Hu Consultant

Only a few owners will attach importance to the ignition of the ignition system status
For the maintenance of spark plugs, I believe that many car owners are concerned that,But in contrast, might only be a few owners will be taking firing position of wire in the ignition system,Most owners had the car ignition energy deficiencies, high fuel consumption, low power even when the cutoff phenomenon, is aware of the problem is the ignition line.

Since the ignition position and the working environment is relatively poor, the aging and a higher risk of breakage.The catalytic system of the engine assembly, the ignition energy shortage, low power problems can cause serious consequences.Therefore, the experts pointed out that the best each traveling 20,000 kilometers,replace the spark plug wire.

Compared with the brake shoe, brake disc is relatively small owners have been mentioned during the maintenance routine matters.In fact, both are important.Most car owners were staring at when the replacement brake but no attention to the worsening of the brake disc, as time goes by, it will directly affect the braking safety.Especially when brake shoes replaced two or three times, should be replaced.After all, the brake disc wear and tear so badly, it would become the thickness of very thin and could affect normal driving.

Everyone has a heart, if the heart stops beating and the life will disappear.Cars are no exception,car diagnostic tool is the heart of the car,therefore, quality is good and bad, directly affects the car's performance and service life.

Scania VCI2 is a truck diagnostic tool that is used together with Scania Diagnosis & Programmer 3 software to diagnose and troubleshoot Scania vehicles.

SCANIA VCI2 Features:
1.Name and version of the vehicle system.
2.Stored fault codes, proposals for remedial action and delete option.
3.Control unit configuration and settings.
4.Information about electrical components and their location.
5.Input and output signals.
6.Activation of components.
7.Spare part programming.
8.Circuit diagrams. For each circuit there is a diagram which clearly shows how the particular circuit is implemented in the respective vehicle.
9.Chassis data. The vehicle gives the program a description of itself and how it is configured.
10.User functions. In order to meet service market requirements to work more effectively, there is an option to troubleshoot via user functions, e.g. cruise control.

Carman vg comprehensive Description
Valuable S/W on stable and fast H/W, Carman scan VG Plus is a universal diagnostic scanner, it works with Asian vehicles, European vehicles and USA vehicles.No need connect with computer.
- New Graphic User Interface and LCD Screen
- Diagnosis only with Battery (OBD I type Vehicle)
- 6 or 8 Cylinder DIS System measurement
- Long life Battery
- Battery Leakage Current : 300uA (about)