Most Common Reasons For Tread Wear In Tyres And Preventive Ideas

The tread is the most important part of your car tyres. Your tyres keep your vehicle stable on roads by providing proper grip and traction. They are also responsible for holding the road surface firmly when you turn or stop your vehicle. All these functions of tyres highly depend on the tread pattern and tread depth. Tyres Lutterworth generally loses its strength over time due to tread wear. In this condition, tread depth gradually goes down. In the UK, tread depth should not reach below the level of 1.6mm. This is indeed the legal limit of tread depth. It means, you legally cannot drive your vehicle if your tread depth is below 1.6mm.

Driving on bald tyres is not only legally wrong but it is morally wrong as well. Bald tyres invite accidents due to their poor gripping power. So, you should not drive on bald tyres if you are sure that your tyres are balding. Keeping an eye on the tread depth is essential for every car driver.

Nowadays, it is easy to have a rough idea about the tread depth. You just need to look at tread wear indicators that are invisible when your tyres have optimum tread depth. If you are able to observe these wear indicators, it clearly means that your tyres are balding.

You also can use a penny coin to measure the tread depth of your tyres. Just place a coin in the groove and try to look at its head. If you see the head of the coin clearly, your tyres are certainly balding.

If you want to take a correct measurement, you may use the tread wear gauge that is available in the market. Treadwear is a process that you can slow down with proper maintenance. However, you cannot eliminate the bad effects completely. Generally, tread wear takes place in tyres due to the following reasons:

Friction

When an object moves on another object, friction will take place. The same happens with car tyres. Friction will take place wherever two objects are moving on each other. So, when your tyres move on the road surface, they will create frictional force.

Heat

Environmental heat also affects the performance level of your tyres. Moreover, tread rubber will degrade when your tyres run on hot road surfaces.

Speed

When you run your vehicle at a high speed, more friction and heat will take to degrade your tyres. Tyres come with a specific speed limit. Damage to tyres will be more serious if you do not respect the speed limit.

Ageing

Tyre rubber has a natural tendency to wear out and you cannot change its nature. Some factors increase the level of rubber degradation, such as sunshine, and heat.

Overloading

Pressure uplifts the level of heat and friction. Therefore, more loads in the vehicle will increase the adverse effects of heat and friction. Just like the speed limit, tyres also have a loading capacity that you should not offend to keep your tyres safe.

Road surface

If your tyres are running on an uneven surface, more friction will take place to degrade the tread rubber. So, the nature of the road surface will also decide the level of tread wear.

Water

If you drive often in wet road conditions, your tyres may face rubber degradation due to the effects of water as well.

Air pressure

High air pressure in tyres will promote tread wear in the middle part of the tread. On the other hand, tread wear will take place on both sides due to low air pressure in your car tyres.

Wrong alignment

Improper wheel alignment is also a reason for uneven tread wear. Actually, this is a warning sign and it takes place when you ignore wheel alignment for a long period of time. You can slow down the process of tread wear with the help of the following steps:

Slow down your car

Keep the speed of your car below the speed limit. Moreover, maintain the speed of your vehicle according to the road surface.

Avoid extra heat

Take regular breaks while you drive your car for a long time. When you park your car, try to keep your tyres away from direct sunlight to save them from extra heat. Do not drive your car if you think your tyres are heated. Extra heat will increase the severity of the damage. Keeping air pressure at the correct level slows down the rate of tread wear.

Check wheel alignment regularly

Do not forget to check wheel alignment at regular intervals. Moreover, consider wheel balancing since it is also a vital factor for the performance of your vehicle.

Choose terrain tyres

To reduce the damage caused by road conditions, you may choose mud tyres or all-terrain tyres. These Continental Tyres Lutterworth are made especially for challenges that drivers face due to road conditions.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Mar 22nd 2023 02:35. Viewed 199 times.

Share on APSense

Comments