MAGIC CAT 3D Pen FAQ ALL You Need To Know!
The Magic Cat is a great tool to get creative in 3D. If you are new to 3D pens or do have a question regarding Magic Cat, you should check this FAQ.
3D pens are great fun, and Magic Cat is no exception. In this FAQ, are the most important questions answered. There are four sections you can jump to:
Before you buy
Start and basic usage
Troubleshooting
Safety
If you want to have questions answered in this Magic Cat FAQ, please add yours to the comments.
1. Magic Cat FAQ: Before You Buy
Magic Cat FAQ #1: What does Magic Cat do?
Its a 3D drawing device. Think of a glue gun that uses plastic strands instead of glue. The heated plastic strand is extruded from the tip whenever you press the botton. This lets you “draw into thin air” and create three-dimensional objects.
Magic Cat FAQ #2: How many versions are there?
There are three versions:Magic Classic, Magic Wireless, Magic Wireless Plus.
Magic Cat FAQ #3: How much does the 3D pen cost?
As of September 2019, the Magic Cat costs $39.99~$59.99 on Magic Cat official website: www.magic-cat.com. Check price of Magic Cat at official website.
Magic Cat FAQ #4: Can I use other brands of plastic strands for my pen?
It's very clear that it is important to only use Magic Cat strands. By using other materials, you void your warranty and may cause damage to the pen.
Magic Cat FAQ #5: Are there accessories available?
Yes, there are. You can buy a Magic Mat sketchpad with stencil and Silicone Finger Protector Caps, PCL Filament, a stand.
2. FAQ: Magic Cat and Basic Usage
Magic Cat FAQ #7: How long can I wirelessly use my pen for?
You can use MAGIC WIRELESS 3D Pen for 60minutes to 1.5h, once it has been fully charged. However, you can continue drawing even while the device is plugged in too.
Magic Cat FAQ #8: What materials can I use?
Currently, there is PCL 3D pen material to choose.
PCL melts at a lower temperature than ABS. The temperature will depend on the material in use at the time of the creation.This 3D printing Pen compatible with PCL Refill Filament, this is a new type of environmentally friendly biodegradable materials made from renewable plant resources. Unlike PLA/ABS filament, PCL filament will not create pungent odor when infused into 3D pen. No odor, nontoxic, especially more healthy for kids.
Magic Cat FAQ #9: Can I leave the plastic in the pen when I turn it off?
This is not advised. By leaving hot plastic in your pen, the degradation of the plastic is accelerated and can cause many different problems with the pen.You should double click feed-out button to feed out PCL filament when you turn it off.
Magic Cat FAQ #10: How will I know when I need to load more plastic into the pen?
You are likely to notice very quickly when you need more plastic. This is because the pen will begin to slow down and plastic will stop being extruded.
Magic Cat FAQ #11: What do the LED lights on my pen mean?
The red light indicates that the pen has not been used for a while, or that it is simply heating up. means the pen is warming up, or has been idle for while. Green is always ready to go. If you are reversing the strand, then the light will flash. A flashing yellow light is a warning that you should charge the pen, or that the pen is charging. Once the 3D pen is fully charged, the light will be a solid yellow.
Magic Cat FAQ #12: How long can I use my device?
The pen is a sturdy and awesome tool, but like any mechanical device, it needs a break now and then. It‘s suggested giving it some downtime after two hours of continuous use (just 30mins or so).
Magic Cat FAQ #13: Can I paint on my doodles?
As soon as your doodle has dried, you can begin decorating and beautifying your print. Options for this could include anything which adheres to the plastic, such as spray paint of acrylic paints
As soon as your doodle has dried, you can begin decorating and beautifying your print. Options for this could include anything which adheres to the plastic, such as spray paint of acrylic paints.
Magic Cat FAQ #14: How strong are my Magic Cat 3D pen?
This is totally up to you and how you use the pen. You can make pretty strong doodles by creating supporting structures. If you create thick pieces, these will also be stronger too. You can do this by going over an area a few times.
If you’re hoping to do the opposite then you can use fewer layers and create more flexible strands very easily too. Simply practice your skills.
Magic Cat FAQ #15: Can I use it for repairs?
Yes, sure! Users are finding many different and creative ways in which the doodler can be used for repairs. As a plastic welding tool, it can repair your previous 3D prints, or anything made from PCL plastic.
Magic Cat FAQ #16: How long will a plastic pack last?
Impressively, a single strand of plastic will stretch to 6FT* 8 Colors its length. This should be enough to last you and your child for hours.
3. FAQ: Troubleshooting
Magic Cat FAQ #19: I can’t start drawing in the air, right?
This skill is one which requires some practice. However, all you need to do is to simply anchor the doodle to a sheet of paper. You can then press down to create a blob on the page. Simply make sure to plastic is stuck firmly and lift off the pen. When you reach the ideal height, you should stop the pen and hold it in place. This allows the doodle to harden.
Magic Cat Pen FAQ draw
Magic Cat FAQ #20: How do I get plastic to stick to paper?
If you are having problems, simply try holding the pen closer to the page. Once there is a blob of extruded plastic on the paper, it has been anchored.
Magic Cat FAQ #21: Why don’t my Doodles look any good?
It may take you quite some time to master the skill. But as with everything, practice makes perfect.By using the tool regularly, you’re likely to find your skills improve quickly. Don’t give up. There are also some helpful tutorial videos which you can follow on website.
Magic Cat FAQ #22: Does my device require maintenance?
You will find that the pen is pretty much maintenance free, but if you have any problems such as jams and blockages, it may be due to leaving plastic in the pen after you have used it.
Magic Cat FAQ #23: What should I do if the plastic is moving slowly?
You may find that if you are coming to the end of a strand of plastic, the extrusion will considerably slow down. But don’t worry as all you need to do is to put a new strand into the back. If this is still working slowly, simply push the strand further down.
Magic Cat FAQ #24: Are there templates getting creative?
Yes, there are. Magic Cat offers a Stencil book which you can use for free. Also, you can find several great project ideas in the official website.
4. FAQ: Safety
Magic Cat FAQ #25: Is it safe for my young child?
This pen is safe to leave with your children. The recommended age is 6+, and you should never leave your younger children unattended. This is because the metal tip of the pen can get as hot as 110C. This can result in severe skin burns.
Magic Cat FAQ #26: Can I use my pen on skin?
You can try this on your hand .
Magic Cat FAQ #27: Does the Start plastic emit any harmful fumes?
PCL filament is a new type of environmentally friendly biodegradable materials made from renewable plant resources. Unlike PLA/ABS filament, PCL filament will not create pungent odor when infused into 3D pen. No odor, nontoxic, especially more healthy for kids.
Magic Cat FAQ #28: Can I touch the plastic when it comes out of the pen?
You should find that you are able to touch the plastic when it emerges from the pen, but it will still be a little warm.
These are all MAGIC CAT 3D Printing Pen FAQ ALL You Need To Know!
Advertise on APSense
This advertising space is available.
Post Your Ad Here
Post Your Ad Here
Comments